Posted By |
Discussion Topic:
vacumn wipers
|
|
tweetsmith01 |
11-07-2024 @ 5:14 AM
|
|
|
New Member
Posts: 109
Joined: Sep 2019
|
what is the easiet way to remove a vacumn wiper motor from a 40 coupe it has a radio and a heater i am 81 can crawl under the dash anymore looking for suggestions i would also like to pass info along to anyone in need that charlie schwendler is back doing what he does best he just rebuilt a 40 fuel pump for me last week i read a post on ford barn that he closed but it was only a short time thanks
|
kubes40 |
11-07-2024 @ 6:14 AM
|
|
|
Senior
Posts: 3436
Joined: Oct 2009
|
At our age, there is no "simple" method to remove the wiper motor. One must crawl beneath the instrument panel and remove the spring load clip that keeps both arms in place. Also, at that time, the vacuum hose should be removed from the wiper motor. The radio and the heater are not in the way to do this. Then, working from below the hood, remove the two 5/16" bolts that fasten the wiper motor bracket to the dash panel. You could I suppose simply allow that assembly to fall to the floor of the car. Installing this assembly will require a person on both sides of the dash panel. One to hold the bracket / motor in place while the other installs the bolts through the dash panel.
Mike "Kube" Kubarth
|
carcrazy |
11-07-2024 @ 9:31 AM
|
|
|
Senior
Posts: 1707
Joined: Oct 2009
|
When working under the dash board on these early Fords, I have found it useful to first remove the front seat so you can lie on your back and look up to better see and access the work to be done.
|
tweetsmith01 |
11-07-2024 @ 9:42 AM
|
|
|
New Member
Posts: 109
Joined: Sep 2019
|
thanks kube
|
tweetsmith01 |
11-07-2024 @ 9:44 AM
|
|
|
New Member
Posts: 109
Joined: Sep 2019
|
yes before i got to be a old man i put a bed pillow on the floor and lay upside down on the seat so i know what you mean thank you have a good one
|
fortyford |
11-09-2024 @ 5:23 AM
|
|
|
Member
Posts: 221
Joined: Nov 2009
|
If your wiper motor is in need of repair while you have it out you can send to Ficken Wiper Service. https://rebuildingtricowipers.com/
|