Posted By |
Discussion Topic:
1948 H-series 6-cylinder accelerator linkage
-- page:
1
2
|
|
rdove |
07-18-2015 @ 4:48 PM
|
|
|
Member
Posts: 61
Joined: Jan 2010
|
Does anybody out there have a picture of 1948 H-series 6-cylinder accelerator linkage in a 2 door sedan? I need a picture of the linkage at the intake manifold. Thanks in advance.
|
ken ct. |
07-18-2015 @ 10:26 PM
|
|
|
Senior
Posts: 1513
Joined: Jan 2010
|
They used a rod type as did the V8's but don't know if its the same length. The "H" engine used a cable type arrangement to the choke only. ken ct.I have 6 cyl rebuilt carbs and parts thereof if you need any. ken ct
|
rdove |
07-19-2015 @ 5:53 AM
|
|
|
Member
Posts: 61
Joined: Jan 2010
|
I need the arms that are attached to the intake manifold if you have them. I think they are held in place by a cotter pin.
|
ken ct. |
07-19-2015 @ 10:53 AM
|
|
|
Senior
Posts: 1513
Joined: Jan 2010
|
Do you have a Green Bible pg. 426 shows parts do you mean # iga-9584 or #iga- 9518. These I have though they are not attached to the manifold ,their part of the carb. Ken ct. call 1-203-260-5945 cell.
|
rdove |
07-19-2015 @ 11:52 AM
|
|
|
Member
Posts: 61
Joined: Jan 2010
|
The closest picture I can find in the Green Bible is on page 399. It shows a G-series 6 cyl. linkage. Part # 9724. The parts I need are not attached to the carb. I've attached a picture. The linkage I need are toward to bottom left of the picture.
This message was edited by rdove on 7-19-15 @ 11:53 AM
|
ken ct. |
07-19-2015 @ 1:01 PM
|
|
|
Senior
Posts: 1513
Joined: Jan 2010
|
Oh I see,that is usually called a bell-crank,that I NO got. Sorry, no idea where to get one. Try Bob Selzam 1-732-928-9421 M,T,T,F. Closed Wed. 10 am to 4 pm.
|
cliftford |
07-20-2015 @ 8:26 AM
|
|
|
Senior
Posts: 845
Joined: Jan 2014
|
I just might have this part. I have an old 6cyl engine in my boneyard that looks a lot like this. It came out of a 46 model. let me know. Gene
|
rdove |
07-20-2015 @ 11:05 AM
|
|
|
Member
Posts: 61
Joined: Jan 2010
|
Thanks, I'll try him.
|
rdove |
07-20-2015 @ 11:10 AM
|
|
|
Member
Posts: 61
Joined: Jan 2010
|
Gene, According to the Green Bible, they were the same from 41-48 on all 6 cylinders. If the one you have is in good shape, I would be interested. The one I have is slightly bent. Randy
|
cliftford |
07-20-2015 @ 12:25 PM
|
|
|
Senior
Posts: 845
Joined: Jan 2014
|
Hi Randy, the one I have is also slightly bent and has some surface rust, but it could be staightened and used. let me know if you are interested. You can call me at 509-670-0408. Gene.
|