Posted By |
Discussion Topic:
‘40 Rear Drum
|
|
mike42 |
11-06-2020 @ 12:14 AM
|
|
|
Member
Posts: 4
Joined: Jan 2013
|
Good morning ......... Having a problem removing the rear drum on my ‘40. I popped it loose, but it only moves a small amount on the spindle. Anyone have a drum puller they could recommend ? Thx very much......Mike
|
1931 Flamingo |
11-06-2020 @ 5:55 AM
|
|
|
Member
Posts: 388
Joined: Nov 2019
|
Try backing off the adjusters, top and bottom. Paul in CT
|
51woodie |
11-06-2020 @ 5:57 AM
|
|
|
Senior
Posts: 517
Joined: Jan 2017
|
Mike. the drum is likely caught on the lip at the back edge of the drum, that develops from wear caused by the brake linings. Back off the adjustments to see if the will work for you.
|
CharlieStephens |
11-06-2020 @ 9:34 AM
|
|
|
Senior
Posts: 893
Joined: Oct 2009
|
Any chance you have "safety hubs"? Look to see if there are two studs with nuts and two bolts holding the backing plate onto the rear instead of four bolts. Add your location and someone may volunteer a puller. Charlie Stephens
This message was edited by CharlieStephens on 11-6-20 @ 9:34 AM
|