Posted By |
Discussion Topic:
new guy with lots of questions
-- page:
1
2
|
|
myfordgirl |
06-30-2010 @ 7:16 PM
|
|
|
Member
Posts: 6
Joined: Jun 2010
|
Hi, I am new to the sight. I am looking at a 1932 Model B pickup to restore/modernize for my wife. I found it in front of an antique store in Maine. It is up for a silent auction. Folks can bid and the owner will sell to the highest bidder at the end of August. It is in really rough shape. It has been sitting in a field since at least 1978 (probably much longer). The cab including doors, engine shroud, radiator shroud and fenders are severely rusted but I think salvageable. It has the original flathead 8 which is also severley rusted. Suspension is there but the tires and rims are rotted off. I would like to get this primarily for the tin. I have 2 primary questions. 1. Is this cab interchangeable with any other cabs? I would like to take this cab and mount it on a modern chassis and find a bed for it. I know form my chevy experennce that the cabs of many trucks are the same...1/2 ton, 3/4 ton and 1 ton on some years are interchangeable. 2. How much do you think this is worth? I will have to place a bid and considering the geographic location and the economy I am thinking I might not have to bid too high. Any advice is greatly appreciated as I am new to Ford restorations. Thanks Rich
|
trjford8 |
06-30-2010 @ 7:44 PM
|
|
|
Senior
Posts: 4214
Joined: Oct 2009
|
Rich, it's tough to give a value without seeing the truck or a few photos. If it's an auction people tend to get caught up in the "hype" and tend to pay too much. If it's rusty I would stay away from it. In today's world paint and body work is real expensive. If you are new to the old Ford world I would look around and get a feel for the value of old pickups. I would check the internet old car sites and look to see sale prices. With the current state of the economy there are some bargains out there and you may find one that is already done. It may be a little more money up front, but the cost of building one has become very expensive. If you find one already finished your wife can drive it now rather than wait 4-5 years for the finished product.
|
myfordgirl |
07-01-2010 @ 4:11 AM
|
|
|
Member
Posts: 6
Joined: Jun 2010
|
TRJ I see your point. I am looking for a project though. I have just finished a 53 chevy 3600. I do all my own work including body work and paint. Believe it or not I find the hours of sanding therapeutic (good thing because I am a terrible painter) I may keep looking for something a little more whole as you say they are out there. However there is a certain sastisfaction I get from saving a rusted hulk from the crusher. I have been looking around at prices and have found the prices to be all over the place. I don't think thre will be too much frenzie over this truck it is in a sleepy little town in the middle of no where. I am not sure how many bids they will get. I will try to get some pics to post next week when I go back there. I look forward to cruising this site and learning from those who know. Thanks so much for the advise Rich
|
trjford8 |
07-01-2010 @ 7:45 AM
|
|
|
Senior
Posts: 4214
Joined: Oct 2009
|
Rich, photos would be great. We will try to answer your questions and help you with whatever you decide to purchase. It's great that you want to save an old Ford.
|
CharlieStephens |
07-01-2010 @ 1:42 PM
|
|
|
Senior
Posts: 888
Joined: Oct 2009
|
Rich, I tried to send you a private message but your private messaging has been disabled. I am concerned from the wording in your post that you are very new to the Model B world and could use some serious help. I suggest you post some pictures or PM them directly to a couple of people for comments. The idea about using a different frame will give you many more problems than it will solve. What do you really hope to end up with in the end, a restoration or a street rod? I strongly suggest you build the car on paper and find what it will cost before you put any money into it. Charlie Stephens
|
myfordgirl |
07-02-2010 @ 4:53 AM
|
|
|
Member
Posts: 6
Joined: Jun 2010
|
Charlie, I really appreciate the advice. I am going back there today. My restored 53 Chevy is in the parade and a show up there. I will post pics when I return and try to figure out how to enable PMs. I am looking for a challenge. I rebuilt my 53 from a rotted out hulk, actually patching fenders that most folks would have scr*pped. I do agree building it on paper is wise. I figured if I came here you guys could advise me on what I need to do that. What frames and cabs can be interchaged with some modifications, etc. In the mean time I have attached a link to my current work. Caution...it a Chevy...so don't be offended.;-) http://rides.webshots.com/album/577941078yrYJgb
|
1932BB |
07-02-2010 @ 6:36 AM
|
|
|
New Member
Posts: 104
Joined: Oct 2009
|
If this truck has an original V8, Model 18 engine it is extremely rare as most '32 pickups were 4 cyl Model B's. The cabs, and all the sheet metal, was the same for the big trucks, Model BB. The '32 to '34 cabs tended to rust badly on the door bottoms and the bottom of the cab back panel both of which can be very time consuming and expensive to restore. Fenders are reproduced as are frames. If this truck spent many years outside, did it have a radiator cap? Does it have an air cleaner? If not, rain water may have gotten into the engine and made it into junk. I admire your willingness to tackle tough projects, and (hopefully) save another old Ford, but due to scarcity of parts for this model, perhaps you would be better off with something more common such as a Model A. Good luck!
|
myfordgirl |
07-05-2010 @ 7:37 PM
|
|
|
Member
Posts: 6
Joined: Jun 2010
|
I have attached pictures as I promised. There are 2 trucks. I have poste mostly pics of the larger 8 cylinder. I am not sure if the smaller 4 cylinder is salavagable. Brace yourself...these trucks are rough...
|
myfordgirl |
07-05-2010 @ 7:39 PM
|
|
|
Member
Posts: 6
Joined: Jun 2010
|
I don't know how to post more than 1 pic at a time. Sorry.
|
3w2 |
07-05-2010 @ 10:19 PM
|
|
|
Senior
Posts: 835
Joined: Oct 2009
|
Despite what the sign in the window states, this is not a '32 Ford truck, but rather a '34. You're right, it is really rough, perhaps beyond saving. Dave
|