Posted By |
Discussion Topic:
39 FORD DELUXE CONVT
-- page:
1
2
3
4
5
6
|
|
TomO |
04-08-2010 @ 10:23 AM
|
|
|
Senior
Posts: 7256
Joined: Oct 2009
|
Sanders glass will make new glass that fits your car, with the correct logos. http://sandersreproglass.com/ or you can take your old glass to a local glass shop and have them cut you new glass to fit your car and then buy the "Bug" kit from Carleton Enterprises. http://www.fordscript.com/
Tom
|
DJACK |
04-08-2010 @ 7:58 AM
|
|
|
Member
Posts: 46
Joined: Mar 2010
|
Almost ready to for my next step. Looking at the glass,looks like the door glass needs replacing it's bubbled at bottom. I'm still looking for windshield. Where is a good glass contact. Thanks again for all your help. Dennis
|
DJACK |
04-07-2010 @ 4:06 PM
|
|
|
Member
Posts: 46
Joined: Mar 2010
|
Yes thanks alot Dennis
|
c-gor |
04-07-2010 @ 3:00 PM
|
|
|
New Member
Posts: 130
Joined: Oct 2009
|
DJACK I can put you in touch with the person who woodgrained the 1939 Dash that was donated to the Ford Foundation If interested please respond
|
DJACK |
04-07-2010 @ 2:56 PM
|
|
|
Member
Posts: 46
Joined: Mar 2010
|
HAY TOM I FOUND ALL THE MOLDINGS FOR THE DASH. THEY ARE IN PRITTY GOOD SHAPE, COULD USE A RECHROME ANY IDEAS. DENNIS
|
Tom/SC |
04-07-2010 @ 12:22 PM
|
|
|
Member
Posts: 51
Joined: Oct 2009
|
Dennis, yes I will go out to the garage and make some photos of the dash including the radio holes and send them to you. Tom
|
DJACK |
04-07-2010 @ 8:21 AM
|
|
|
Member
Posts: 46
Joined: Mar 2010
|
TOM /SC COULD YOU GET ME A PHOTO OF YOUR DASH WITH THE RADIO IN IT . SOMEONE CUT THE DASH OUT AROUND THE CONTROL KNOBS. I NEED TO GET THE DASH BACK TO ORIGINAL BEFOR I SEND IT OUT FOR WOOD GRAINING. THSNKS DENNIS
|
Tom/SC |
04-07-2010 @ 6:11 AM
|
|
|
Member
Posts: 51
Joined: Oct 2009
|
Dennis that is a stainless strip across the dash. Not easy to find one. I will look thru my pile of stuff to see if I might have one extra. Tom
|
DJACK |
04-06-2010 @ 9:05 PM
|
|
|
Member
Posts: 46
Joined: Mar 2010
|
Yes I have the strips between the gages and by the clock are ok I.m still looking for the long strip across the the top. I got the book for the 38 and 39 Fords. I can see already how much help it will be. Thanks again for your help. Thanks Dennis
|
Tom/SC |
04-06-2010 @ 3:20 PM
|
|
|
Member
Posts: 51
Joined: Oct 2009
|
Dennis the chrome on my dash was in good shape so I had it replated and used it. Place a "wanted" ad on this website asking for this trim, and you might find some that you can use. If yours is not bent or damaged, you can have it replated. Then you will need to paint the small indention in each piece with red paint. Most of it that you find probably will have some rust on it. Are you speaking of the small piece between the guages and the speedometer? And the two pieces on either side of the clock? Tom
|