Posted By |
Discussion Topic:
1941 horn ring
|
|
ftda1941sd |
04-12-2016 @ 6:05 PM
|
|
|
Member
Posts: 27
Joined: Jun 2011
|
Does the '41 utilize the stainless steel ring part # 6a-3628? Mine didn't/doesn't have one but I see it listed at Mac's, Dennis Carpenter and others. If so does it go tight against the horn ring? Thanks Bob.
|
42wagon |
04-13-2016 @ 10:15 AM
|
|
|
Senior
Posts: 585
Joined: Oct 2009
|
You have me a little confused. I assume you have a chrome plated diecast horn ring and I assume you have the plastic center horn button (for lack of a better name). For the horn button to attach to the horn ring you need the retainer part number 6a-3628. The button is held in the retainer and the "ears" on the underside bend into slots in the ring. I don't know how you managed to hold the pieces together without it.
|
ftda1941sd |
04-13-2016 @ 12:47 PM
|
|
|
Member
Posts: 27
Joined: Jun 2011
|
Yes I have the chrome plated cast horn ring. I also have the 3 tab ring attached to it via 3 insulated screws and a spring. I have no plastic part. I'm trying to find out what I'm missing and may still need. Thanks Bob A.
|
42wagon |
04-13-2016 @ 1:45 PM
|
|
|
Senior
Posts: 585
Joined: Oct 2009
|
Well without a picture I'm still in the dark as to what you have but in the center where you would expect to find a horn button there should be a large round piece called a horn button in Mac's catalog and having a part number like 6a-3627-B. If you have that, you probably have everything. If not I don't know where to find one for a 41.
|
41-42fordadvisor |
04-14-2016 @ 6:56 AM
|
|
|
New Member
Posts: 110
Joined: Nov 2009
|
The ring part number 6A-3628 is only used on 1942-1948 Ford Super Deluxe horn rings. The 1941 Ford Super Deluxe horn ring does not have a plastic center. Fred Killian
|
TomO |
04-14-2016 @ 4:02 PM
|
|
|
Senior
Posts: 7256
Joined: Oct 2009
|
The easiest way to find out what you are missing is to post photos.
Tom
|
ftda1941sd |
04-14-2016 @ 5:23 PM
|
|
|
Member
Posts: 27
Joined: Jun 2011
|
Thanks everyone for your assistance. C & G listed that part as a 42-48 application. The other vendors had it for 41-48. Fred thanks for clearing that up. Bob A
|
mrtexas |
04-14-2016 @ 8:25 PM
|
|
|
Member
Posts: 68
Joined: Dec 2011
|
Here is a picture: ---
This message was edited by mrtexas on 4-14-16 @ 8:26 PM
|
engine |
04-22-2016 @ 10:14 AM
|
|
|
New Member
Posts: 103
Joined: Dec 2012
|
If you have trouble getting one you can try Baxters Ford parts in Lawrence Kansas
|