Posted By |
Discussion Topic:
Mallory Distributor
|
|
Superdave |
09-25-2015 @ 4:33 AM
|
|
|
Member
Posts: 23
Joined: Sep 2015
|
Anyone have the wire breakout for the Mallory distributor on 39? There are three wires going to the coil from the distributor, but I have no idea where they go. This car has been modified to 12 volts neg. gnd.
|
4dFordSC |
09-25-2015 @ 7:52 AM
|
|
|
Member
Posts: 266
Joined: Oct 2009
|
Have you checked with Bubba? http://www.lindertech.com/bhrs/
|
Superdave |
09-25-2015 @ 1:57 PM
|
|
|
Member
Posts: 23
Joined: Sep 2015
|
Sent them an email.. Thanks. I gave up trying to make heads or tails of the Mallory site.
|
Whifty |
09-25-2015 @ 2:21 PM
|
|
|
Member
Posts: 45
Joined: May 2014
|
RED WIRE: Connect to the positive side of coil (+). GREEN WIRE: Connect to the negative side of coil (-). BROWN WIRE: Connect to engine ground. http://static.summitracing.com/global/images/instructions/MAA-unilitedistributorwiringdiagramtestproced.pdf
This message was edited by Whifty on 9-25-15 @ 2:27 PM
|
Superdave |
09-26-2015 @ 6:06 AM
|
|
|
Member
Posts: 23
Joined: Sep 2015
|
Thank you. I guess what threw me off was the illustrations didn't look anything like the distributor on the car. but I see the same principal applies to all of them.
|