Posted By |
Discussion Topic:
Wedge vs star-wheel brake floaters
-- page:
1
2
|
|
pauljanet |
03-25-2014 @ 3:27 PM
|
|
|
Member
Posts: 6
Joined: Feb 2014
|
I'd like to put a set of brake floaters on my '35 Fordor. I see that Flathead Ted sells floater kits that have floating wedges in them, and CG Ford (and others) sells kits that appear to contain something like star-wheel adjusters in place of the floating wedges. It looks like it would be very difficult to adjust the star-wheel type adjusters by reaching thru the 5/8 threaded hole where the original adjuster wedges have been removed. Does anyone know whether one type of kit is better than the other?
|
ford38v8 |
03-25-2014 @ 10:05 PM
|
|
|
Senior
Posts: 2793
Joined: Oct 2009
|
Star wheel adjusters began use on Ford cars in 1949. Previously, Old Henry refused to pay the license fee for the design. Star adjusters are easily accessed with a brake spoon. I'm not certain about the '35 and '36 for the star adjusters. The system is superior if applicable to those years, however, I was under the impression that stars would only work with the '37 and '38 brakes. The C&G website is not available at the moment, so I can't view the floaters they have. Ask them specifically about your model year. They are straight up and will advise you. Someone please set me straight on star floaters for '35?
Alan
|
Don Rogers |
03-27-2014 @ 6:44 AM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
Paul and Alan, The floaters or energizers were designed for 35 thru 38 brake systems. The original instructions give directions for 35-36 systems and 37-38 systems. I have them on both my 35 Fords and they improve my braking greatly.
|
JM |
03-27-2014 @ 9:27 AM
|
|
|
Senior
Posts: 823
Joined: Oct 2009
|
I installed floaters like Don has pictured in his post on my '35 fordor last year before driving it on a 7200 mile trip. They gave a huge improvement in braking. I am planning to put floaters on my '35 5w coupe this summer, but thinking I will give a set of Flathead Teds floaters a try.
John
|
JM |
03-27-2014 @ 9:28 AM
|
|
|
Senior
Posts: 823
Joined: Oct 2009
|
.....
This message was edited by JM on 3-27-14 @ 9:29 AM
|
ford38v8 |
03-27-2014 @ 4:22 PM
|
|
|
Senior
Posts: 2793
Joined: Oct 2009
|
John, the star type of floater actually floats free of any side pressure, only having the shoes in actual contact. Ted's floaters cannot acurately be descibed as such, due to the side pressure applied from the adjuster on the backing plate. Ted's are, I believe, wedges similar to Ford's, but of superior design? The early brakes being different from the later, Ted's floaters are the only ones that can be installed. I had been mistaken about the '35-'36 being among that group, Don Rogers set me straight on that. Thanks Don.
Alan
|
flatheadfan |
03-27-2014 @ 10:39 PM
|
|
|
Member
Posts: 450
Joined: Oct 2009
|
I have the common "star" adjusters that Don Rogers shows in his response. I have them on a '36. Reaching through the 5/8" threaded hole is not a problem. I just use a screwdriver. Once adjusted they work fairly well. Tom
|
JM |
03-28-2014 @ 2:17 PM
|
|
|
Senior
Posts: 823
Joined: Oct 2009
|
Alan, I am not quite understanding the last part of your last post. Are you saying that Ted's floaters (more like wedges than floaters) can or can not be installed in '35-'36? Maybe I need to go to his website to see what his design looks like. I had been under the impression that his design was superior to the other (star wheel) designs. True/false??
John
|
MG |
03-28-2014 @ 3:59 PM
|
|
|
Senior
Posts: 1263
Joined: Nov 2009
|
Don Rogers, I have a set of the floaters you pictured but I don't have the instruction sheet for there installation. Can you post the instructions? MG
|
Don Rogers |
03-28-2014 @ 4:58 PM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
See if this is clear enough.
|