Posted By |
Discussion Topic:
Head Studs Weak - Won't Torque
|
|
TomO |
04-27-2013 @ 8:23 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
Roy Nacewicz sell quality stud sets for your engine.
Tom
|
fla48 |
04-25-2013 @ 5:17 PM
|
|
|
New Member
Posts: 128
Joined: Nov 2011
|
Also, do not use a lubricant on studs nuts or bolts when torquing as this caused an over torque condition.
|
supereal |
04-25-2013 @ 4:25 PM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
We always replace all studs or head bolts when rebuilding. The constant heating and cooling anneals old studs and makes them weak. Our choice is ARP studs. A bit more expensive, but cannot be beat. Oiling studs and/or nuts skews the torque readings.
|
nstanley |
04-25-2013 @ 4:06 PM
|
|
|
Member
Posts: 1
Joined: Apr 2013
|
All, I'm putting together a 59A I've just gone through, and I have reused the original head studs, replacing a few damaged ones with other spare used ones so that all are in excellent shape with good threads. Stock 59AB iron heads. I cannot get most of the studs of 52 ft-lbs without the studs stretching/yielding. I tried a few in a cracked block, and 60 ft-lbs will break them. I am using new plated nuts from Mac's and 10W-30 on the threads and nut faces. Has anyone else seen this? I have one head on and all the studs took a solid 50-52 ft-lbs. I have yet to do the other side. SHould I pull it back apart and replace all the studs? WHo do you recommend getting studs from? Thanks, Nick.
|