Early Ford V-8 Club Forum

EFV-8 Club Forum / General Ford Discussion / 1941 Sedan Delivery

Reply to Discussion | New Discussion << previous || next >>

Posted By Discussion Topic: 1941 Sedan Delivery -- page: 1 2     MDB 01-18-2012 @ 1:52 PM reply profile send p.m. Member Posts: 28 Joined: Nov 2010 Thanks to all Early Ford V/8'rs for your response, I'm a bit overwhelmed. To me this reflects on who we are in willingness of the seasoned veterans to impart the knowledge and experience of years to some more recent but less informed. Secondly, although I had no desire to acquire the Sedan Delivery, but keen interest in deviation from or confirming authenticity. I was very impressed with desire of members apparent attempt to protect the presumed possible investment of a less savy potential buyer. Besides it was a fun read! deluxe40 01-16-2012 @ 4:40 PM reply profile send p.m. Member Posts: 413 Joined: Oct 2009 I believe the '41 Sedan Delivery came with an all-wood-grained dash. Also, the instrument cluster was like a '40 Standard, but had the colors reversed (brown numbers on yellow background). I don't think the '41 delivery had the horizontal chrome trim pieces like the '40 Deluxe cars. I have always wondered if the '41 delivery was responsible for the glove box doors that have provision for a clock, but do not have the chrome trim pieces. Does anyone have documentation (or an original '41 Sedan Delivery)? 46fordnut 01-16-2012 @ 12:56 PM reply profile send p.m. Member Posts: 332 Joined: Oct 2009 found another truck on e bay needs work but it is all there ether 41 or 40.. it has a v8 . e bay number 140680059500 100 horse running wild TomO 01-16-2012 @ 10:45 AM reply profile send p.m. Senior Posts: 7253 Joined: Oct 2009 I have trouble believing that the dash is original. It has the early 1940 dash painted in 1940 Deluxe colors. IMHO the 41 would have had the later 40 dash or the commercial dash. Tom supereal 01-16-2012 @ 7:48 AM reply profile send p.m. Senior Posts: 6819 Joined: Oct 2009 Actually, the four cylinder trucks used a 4:55 rear gearing, The 4:44 was for the 60HP vehicles beginning in 1937. I don't doubt that there are 9N fans out there, as many of those old machines survive today. The brake pedals were on the same side as the clutch, making operation tricky if you got stuck, and the internal pin linking the three point hitch had a nasty habit of breaking. My 9N had a loader, but was designed to only lift, instead of pushing both up and down, so you couldn't dig with it or plow show easily. I traded mine on a Ford 3000 gas tractor, which was an improvement, but my current Ford diesel tractor is the best of all, if you remember to use your ear plugs. It is very loud, and can make your head ache for days. The four banger was a derivitive of Henry's cherished Model A, and sounded just like one. Those looking for increased power adapted the early tractors to a V8. alanwoodieman 01-15-2012 @ 7:15 PM reply profile send p.m. Senior Posts: 868 Joined: Oct 2009 National meet in Atlanta, red truck with a 4 cylinder, I have a couple of pictures. Strangest thing I ever say-had a 4:44 rear axle. Used to build tractor engines, 8N, 9N ,2N, easy to work on ran forever and would pull just about anything put behind them, geared very low, would pull but not fast!! jims33 01-15-2012 @ 5:32 PM reply profile send p.m. Member Posts: 25 Joined: Dec 2011 I've messed around with 9N's some and never thought they were particularly short on power. I had one years ago and remember pulling stuff with the 3 point bar (I know you're not supposed to do that). It would pull so hard the front wheels would come 3 feet in the air. It seemed like I couldn't kill it. I worked on one this spring for a friend and got it running, it sure seemed like it had plenty of pulling power to me. Not compared to a modern diesel I suppose, but still pretty good. The 8N was a nicer tractor though. I use a 600 Ford for plowing snow now, and I don't think it could pull as hard as a good 9N. wrosenkrans 01-15-2012 @ 11:55 AM reply profile send p.m. New Member Posts: 134 Joined: Oct 2010 Several of the Ford prototype Jeep vehicles, before they standardized on the design for production by Willys and Ford, had the Ford 9n tractor engine in them. Shoehorning that into the Jeep engine bay was not a good thing - the forth spark plug and most of the back of the engine was virtually unreachable and impossible to work on, even to change the plug. Wayne & Barb '42 Super De Luxe Tudor supereal 01-15-2012 @ 10:52 AM reply profile send p.m. Senior Posts: 6819 Joined: Oct 2009 That engine for 41-41 shared many of the same parts as the Ford tractor 9N. The difference was mostly in the oil pan, as the tractor used the Ford practice of having the engine for the main structural part, with a heavy cast oil pan, while the truck version had a more conventional sheet metal pan. The idea was to provide an economical vehicle for short trip deliveries. Unfortunately, it shared the lack of power of the 9N, and couldn't get out of its own way. The later 8N and Jubilee tractors were a considerable improvement, but the engines never appeared again in trucks. I owned a Ford 9N tractor, and it could hardly pull itself. It is interesting that Ford is now importing a Turkish built truck, the "Transit", with a tiny engine for reasons of economy, a revival of the earlier concept. 41-42fordadvisor 01-15-2012 @ 7:30 AM reply profile send p.m. New Member Posts: 110 Joined: Nov 2009 Ford did indeed offer a four cylinder engine as a option for the 1941 and 1942 light commercial vehicles . This engine was indeed the same four cylinder engine that was used in the Ford tractor. So this sedan delivery could have come from the Ford factory with this four cylinder engine. A few years ago I saw a 1941 Ford pick-up with a four cylinder engine at a National Early Ford V-8 Club meet.

<< previous || next >>

PAGE: 1 2

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

EFV-8 Club Forum Home | Back to Home Page | Contact the Webmaster

Copyright © 2009 - EFV-8.org
Powered by < CF FORUM > v.2.1