Posted By |
Discussion Topic:
36-39 wheels
|
|
Bob56 |
08-23-2023 @ 5:20 AM
|
|
|
New Member
Posts: 120
Joined: Jun 2012
|
does anybody take these wheels apart and restore them
|
nelsb01 |
08-23-2023 @ 1:54 PM
|
|
|
Senior
Posts: 982
Joined: Oct 2009
|
There should not be a reason to "take them apart". Sandblasting and painting should be all that is needed. If you look close at the flat area between the clips -- you should find Ford Scrip and then a date code as to when the rims were manufactured.
|
wmsteed |
08-24-2023 @ 1:31 PM
|
|
|
Senior
Posts: 613
Joined: Oct 2009
|
if the wheels you have are very badly rusted with deep rust, discard them in favor of wheels that have only light surface rust. Have the wheels spun up on a balancing machine to check for trueness, then media blasted, primed and powder coated. I would suggest you check the wheels for Ford and/or KH and date to make sure they are OEM in lieu of after market. You should also check the wheels for rim width, They will vary from 3.5" to over 4". V8 60 wheels are the narrow ones, 85 HP are wider.
Bill 36 5 win delx cpe
|
Kens 36 |
08-24-2023 @ 2:01 PM
|
|
|
Member
Posts: 343
Joined: Oct 2009
|
Bob, Are you trying to restore a whole set like that, or do you only need one? Where are you located? Ken
|
37RAGTOPMAN |
08-25-2023 @ 7:28 AM
|
|
|
Senior
Posts: 1958
Joined: Oct 2009
|
HI if you buy wheels, besure to check the stud hole for wear, long gated, loose rivits, ETC also if you need the hub cap CLIPS, I used from a VW hope this helps 37 Ragtopoman, MAINE
|
CharlieStephens |
08-25-2023 @ 11:47 AM
|
|
|
Senior
Posts: 888
Joined: Oct 2009
|
Visit a powder coater first after they are checked out. They probably will want to blast them so they can powder coat them IMMEDIATELY after they are blasted. Charlie Stephens
|
51504bat |
08-25-2023 @ 5:19 PM
|
|
|
Member
Posts: 252
Joined: Apr 2020
|
Drake sells the clips. Don't know if they are in stock https://bobdrake.com/search?type=product&q=hub+cap+clips
______________ No signature
|
Bob56 |
08-26-2023 @ 3:42 AM
|
|
|
New Member
Posts: 120
Joined: Jun 2012
|
Thanks everyone. Talked to a powder coater and he said not necessary to take apart.
|