Posted By |
Discussion Topic:
36 emergency brake
|
|
40 Coupe |
07-06-2010 @ 9:12 AM
|
|
|
Senior
Posts: 1676
Joined: Oct 2009
|
the clevis at the brake cross shaft 48-2466 has an elongated hole for the pin, so the cross shaft can move without moving the brake pedal.
|
MOXIE |
07-05-2010 @ 8:09 PM
|
|
|
New Member
Posts: 102
Joined: Oct 2009
|
The brake pedal needs to have a return spring to keep it in the upright position when emergency is used. This is a seperate spring than the one that controls the brake equilzer unit.
|
trjford8 |
07-05-2010 @ 7:35 PM
|
|
|
Senior
Posts: 4215
Joined: Oct 2009
|
The switch has slotted holes for the screws and should be adjustable.
|
40fordor |
07-05-2010 @ 5:33 PM
|
|
|
New Member
Posts: 116
Joined: Oct 2009
|
When the emergency (parking brake) is fully engaged it activates the brake lights. I can see the foot brake petal move down just a little when at the same time. What adjustments do I need to examine to correct this problem? I have been throwing the battery disconnect switch to avoid battery discharge. Don
|