Posted By |
Discussion Topic:
1934 engine rebuild
-- page:
1
2
|
|
grilledstripedbass |
04-21-2019 @ 9:21 AM
|
|
|
Member
Posts: 4
Joined: Apr 2019
|
Have a 1934 Ford two door deluxe sedan Vineyard Green (original car ) looking to get this engine rebuild would like to find somebody in my general area of Rhode Island. Engine runs fine but it smokes when you give it any gas. Looking for a stock rebuild. thanks raymond_cabral@cox.net
|
MG |
04-21-2019 @ 10:35 AM
|
|
|
Senior
Posts: 1261
Joined: Nov 2009
|
Do you know if your engine has Babbitt main bearings? It's pretty hard to find a machine shop that can pour Babbitt these days. Maybe just a ring and valve job will do for you....
|
grilledstripedbass |
04-21-2019 @ 4:19 PM
|
|
|
Member
Posts: 4
Joined: Apr 2019
|
Not sure if they are Babbitt main bearings in my motor, did speak with a gentleman from New York that would make the needed Babbitt bearings we had a great conversation. Not that I don't want him to rebuild my 34's engine just looking for somebody closer to home. Now from what your saying there is more to rebuilding this engine the correct way than I thought. thanks grilledstripedbass
|
doghair3 |
04-22-2019 @ 5:56 AM
|
|
|
Member
Posts: 13
Joined: Apr 2016
|
Have you looked into Eastwoods Machine shop http://www.eastwoodsautomachine.com/
|
TomO |
04-22-2019 @ 6:09 AM
|
|
|
Senior
Posts: 7256
Joined: Oct 2009
|
grilledstripedbass , what color smoke are you seeing, black, blue or white? Black indicates excess fuel, white indicates a coolant leak and blue indicates oil usage. You should also have a dry and wet compression tests made on the engine to determine if the engine needs a rebuild.
Tom
|
grilledstripedbass |
04-22-2019 @ 9:19 AM
|
|
|
Member
Posts: 4
Joined: Apr 2019
|
It’s a blue smoke I should’ve stated that earlier sorry .
|
grilledstripedbass |
04-22-2019 @ 9:35 AM
|
|
|
Member
Posts: 4
Joined: Apr 2019
|
Thank you for the Eastwood tip I did call Mark Eastwood and we did chat . Come to find out his shop is located right near my mother-in-law Thanks again!
|
len47merc |
04-22-2019 @ 11:00 AM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
Well grilledstripedbass, sometimes you have to take the bad with the good...
Steve
|
Model B |
04-22-2019 @ 4:09 PM
|
|
|
Member
Posts: 90
Joined: Oct 2009
|
"Well grilledstripedbass, sometimes you have to take the bad with the good..." Now THAT'S funny! Pat
|
RIrover |
04-22-2019 @ 6:40 PM
|
|
|
Member
Posts: 22
Joined: Oct 2013
|
J m machine shop. In Massachusetts. Southborough. Excellent craftsman. Did my 40 flathead stock
regards, David B Campbell
|