Posted By |
Discussion Topic:
Spare Wheel (tread) Cover 1934
-- page:
1
2
|
|
D.J.Minnett |
07-06-2018 @ 5:13 AM
|
|
|
Member
Posts: 6
Joined: Jul 2018
|
Hi 3w2. Thanks for coming back again on this. So its a '35-'36 tread cover. The rust pitting is not so bad, it looks worse than it actually is in the photo. I have air sandblast cabinet (fine grit) so will give it the treatment before selling. Thanks again. ATB Dave.
|
3w2 |
07-05-2018 @ 4:27 PM
|
|
|
Senior
Posts: 849
Joined: Oct 2009
|
Well, now we all know that it is not for a '34. In your earlier photo, the band looked heavily pitted, so its value on this side of the pond would rather limited as there a lot of the '35-'36 spare tire bands available in better condition. In the U.K., however, spare parts are understandably more difficult to come by, so perhaps something like 30 or 40 pounds sterling might be in order.
|
D.J.Minnett |
07-05-2018 @ 1:16 AM
|
|
|
Member
Posts: 6
Joined: Jul 2018
|
Hi 3w2 and JeffH. Thanks again for all your excellent replies. I have checked against 'Don's' chart and dimensions are as follows: A = 27.38" B = 2" C = 82.82" D = 5.75" According to Don's chart this gives possibilities of it being either 48-1395-B, 67-1395-A or 68-1395. The width of the pressed radial 'hump' or 'band' in the centre (correct English spelling by the way) of 'D' is 1.125" wide which I guess is now the deciding factor. Back to you guys for the final word! I have been an EFV8CA member since 1974 and I don't remember any features on the different wheel covers ever being in The V8 Times, so this subject is becoming quite interesting! I also don't remember ever seeing a wheel cover for sale in the 'classified ads', so an indication of a fair price would be appreciated if you can do that also. Thanks again (and don't forget to cheer for England in the football 'World Cup' on Saturday). For fun, a photo of my '36 Model Y in film work being driven by actor Jeremy Irons attached. ATB Dave
|
3w2 |
07-04-2018 @ 8:08 PM
|
|
|
Senior
Posts: 849
Joined: Oct 2009
|
Thanks to Don's illustration and VT/JeffH's sharing of it, if your outer band is less than 5.75 inches, then you likely have the '34 version.
|
VT/JeffH |
07-04-2018 @ 11:30 AM
|
|
|
New Member
Posts: 153
Joined: May 2010
|
I just found a document that might save us time. It's from the fabulous Don Rogers, thank you Don sir!
-VT/JeffH
|
VT/JeffH |
07-04-2018 @ 11:07 AM
|
|
|
New Member
Posts: 153
Joined: May 2010
|
I think we're getting closer. What is this dimension?
-VT/JeffH
|
3w2 |
07-03-2018 @ 5:16 PM
|
|
|
Senior
Posts: 849
Joined: Oct 2009
|
I'm sure that you meant that the band width was something much wider than 1 1/8". Without that correct dimension, your photos leave open the possibility that it is a '35-'36 band.
|
D.J.Minnett |
07-03-2018 @ 5:07 AM
|
|
|
Member
Posts: 6
Joined: Jul 2018
|
Hi Again 3w2 and JeffH. I have now attached a photo of the entire tread cover. Regards. Dave M.
|
D.J.Minnett |
07-03-2018 @ 5:00 AM
|
|
|
Member
Posts: 6
Joined: Jul 2018
|
Hi 3w2 and JeffH. Thanks both for the replies. I have attached a photo of the tread cover showing the base clip. The outside diameter of the cover is 27ins. and the band width is 1 1/8ins. Hoping this is 1934 as I thought. Regards. Dave M.
|
VT/JeffH |
07-02-2018 @ 5:49 AM
|
|
|
New Member
Posts: 153
Joined: May 2010
|
D.J.Minnett said: "...If I post photos of the cover and give dimensions etc., is there a knowledgeable V8'er out there who will be kind enough to give an opinion? " Heh heh, try to find one that won't! You might even find a few unknowledgeable ones too. Gentle reminder, this forum supports one photo per post, so it may take more than one post to give us the look we'll need to give your ID.
-VT/JeffH
|