Posted By |
Discussion Topic:
radiator fin restoration
-- page:
1
2
|
|
ford38v8 |
08-29-2017 @ 10:02 AM
|
|
|
Senior
Posts: 2758
Joined: Oct 2009
|
Ah, Steve, that's right, the "fine tuning" is where a comb is really useful, once the individual fins are close to final alignment.
Alan
|
len47merc |
08-29-2017 @ 6:13 AM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
To Alan's very good point, the 'comb' I referenced earlier was only effective in repairing/straightening about 50% of the bent fins on my '47 (rear/fan side). Other areas were too damaged for the comb to be effective without tearing/damaging the thin fins. These areas were carefully straightened with a lot of focus, patience and time using small thin nylon implements, etc., one fin/one point of damage at a time. The comb works great in 'repairing' mildly bent fins only. To do it 'right' as Alan states you'll need to simply bite the bullet and invest the time. Much of what I used the comb for was simply to fine-tune those areas I had necessarily repaired one fin at a time.
Steve
|
ford38v8 |
08-28-2017 @ 7:09 PM
|
|
|
Senior
Posts: 2758
Joined: Oct 2009
|
Gregg, There isn't a slick labor saving way to do a good job on the fins. A comb can give you a quickie, but is sloppy and can damage some fins while straightening others. If a job is worth doing, it's worth doing right.
Alan
|
sarahcecelia |
08-28-2017 @ 4:20 PM
|
|
|
Senior
Posts: 1186
Joined: Mar 2013
|
I have a little kit that I bought years ago to straighten radiator fins. It has little plastic combs in it for different fin spacings. I think you should ask someone in the AC business. or google "Cooling fin tool," or if that doesn't work, use your imagination to try different variations of that on Google.
Regards, Steve Lee
|
len47merc |
08-28-2017 @ 4:13 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
I use one like this and it works very well: https://www.oreillyauto.com/detail/robinair-4797/tools---equipment-16488/tools-17919/mechanics-tools-16816/air-conditioning-tools-16499/gauges---specialty-tools-17979/radiator-condenser-fin-comb/18403/4703645 Believe I purchased it from NAPA originally.
Steve
|
1937sedandelivery |
08-28-2017 @ 3:19 PM
|
|
|
Senior
Posts: 501
Joined: Jul 2014
|
Wow, lots of choices. Looks like Autozone and O'Reilly's carries them. Good excuse to go for a spin. Radiator fin spacing is: 11 fins/inch, 10 fin spacing/inch. Thanks to all for the quick responses. I wanna get this thing done and on the road. gregg
|
MG |
08-28-2017 @ 2:50 PM
|
|
|
Senior
Posts: 1254
Joined: Nov 2009
|
eBay has a variety of fin combs here > https://www.ebay.com/sch/items/?_nkw=radiator+fin+tool&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=&rmvSB=true
|
kubes40 |
08-28-2017 @ 2:34 PM
|
|
|
Senior
Posts: 3396
Joined: Oct 2009
|
I had silver soldered a pair of very thin pieces of steel to the end of a needle nose pliers. Time consuming task to straighten an entire core but the results are wonderful. If you're not seeking perfection, attempt to locate a comb. Mike "Kube" Kubarth
This message was edited by kubes40 on 8-28-17 @ 2:36 PM
|
1940 Tom |
08-28-2017 @ 2:33 PM
|
|
|
Member
Posts: 240
Joined: Oct 2009
|
Good Afternoon, Gregg--- Do an internet search - "radiator fin comb". Looks like there is a ton of various types, styles and sizes out there and available. I think you can find one that will work for you. It's possible some other Club members have some other suggestions for the fin straightening work, but they will advise. Good luck on your radiator project. Tom
|
40 Coupe |
08-28-2017 @ 2:29 PM
|
|
|
Senior
Posts: 1675
Joined: Oct 2009
|
Most of the air conditioning stores sell fin combs. Get your number of fins per inch since there are several different.
|