Posted By |
Discussion Topic:
1941 Steering Box Shims
|
|
woodiewagon46 |
06-09-2017 @ 2:14 PM
|
|
|
Senior
Posts: 704
Joined: Nov 2012
|
As Jim states, there are a lot of things going on in the steering box that need attention, that a shim set is going to help. Sector shaft gears, sector shaft bushings, bearings etc. Have you isolated the play and determined that the steering box is the culprit.
|
Jim Haskins |
06-09-2017 @ 1:08 PM
|
|
|
Member
Posts: 1
Joined: Mar 2016
|
You might be headed in the wrong direction. Check Mac Vanpelts site lots of good info. there plus parts
|
Fhower |
06-05-2017 @ 10:46 AM
|
|
|
Member
Posts: 32
Joined: Dec 2016
|
I am attempting to reduce excess play in the steering and it looks like I need to remove shims from the steering box. I have the shims located and isolated the individual shims. What is the best method for actually removing the shims. I am afraid of damaging the rest of the shims. Are these shims metal or paper? Should I grab them with small need nose pliers and pull. Just new to this and any advice is welcome
|