Early Ford V-8 Club Forum

EFV-8 Club Forum / General Ford Discussion / Rusted-up steering lock

Reply to Discussion | New Discussion << previous || next >>

Posted By Discussion Topic: Rusted-up steering lock -- page: 1 2     Robert/Texas 08-28-2016 @ 5:20 AM reply profile send p.m. New Member Posts: 108 Joined: Dec 2009 Mix half and half acetone and ATF. That works better than the other stuff for me and is a lot cheaper. pinnsky 08-26-2016 @ 1:26 PM reply profile send p.m. New Member Posts: 103 Joined: Jan 2014 Evapo Rust is sold at Harbor Freight Larry Lange 08-26-2016 @ 10:23 AM reply profile send p.m. Member Posts: 93 Joined: Jun 2011 Hi, Jeff. Thanks for the offer regarding Kroil, Rust911 and Evaporust. If I need them I suspect there are suppliers here. I appreciate everyone's suggestions. Larry Lange / PSRG mrtexas 08-24-2016 @ 5:30 PM reply profile send p.m. Member Posts: 68 Joined: Dec 2011 Evaporust which is the same active ingredient although much more expensive per mixed gallon as Rust911 is available at Autozone and other parts houses. It dissolves rust without leaving a residue. IMHO I'd stay away from acidic vinegar as locks often contain pot metal. This message was edited by mrtexas on 8-24-16 @ 5:56 PM VT/JeffH 08-24-2016 @ 4:51 PM reply profile send p.m. New Member Posts: 153 Joined: May 2010 Hi Everyone, Larry, PB Blaster and Kroil or AeroKroil (a personal first-choice), are both penetrants and can only loosen stuck stuff or do light rust prevention. The Rust911 and Evaporust are going to make rust go away like magic. Vinegar don't cost much though. I'd be super-willing to double cryo-pack a pint or so and mail it to you but the Post Office don't like liquids. Mebee we can work something out. I'm in the mid-atlantic region -VT/JeffH This message was edited by VT/JeffH on 8-24-16 @ 4:58 PM Larry Lange 08-24-2016 @ 10:58 AM reply profile send p.m. Member Posts: 93 Joined: Jun 2011 Hey, thanks for the suggestions, folks. Hadn't thought of vinegar, and I think I'll give it a try. Hadn't heard of Rust 911, either, so it's another option. After I sent the original message I did hear of a penetrant called croil (not sure of the spelling), which I'm also told will work though it may take a while, like the vinegar. Thanks for the responses!! Larry Lange, PSRG, Seattle mrtexas 08-23-2016 @ 9:14 PM reply profile send p.m. Member Posts: 68 Joined: Dec 2011 I second the Rust911. The stuff is a miracle worker for when you want to dissolve rust without leaving a residue like inside a lock. I've used it on locks and glove box hinges. If you are in a hurry you can use Evaporust, same stuff but more expensive. This message was edited by mrtexas on 8-23-16 @ 9:15 PM VT/JeffH 08-23-2016 @ 2:53 PM reply profile send p.m. New Member Posts: 153 Joined: May 2010 Hi, I've been doing some reading over on the 'barn about rust (search Rust911). Recently got a gallon of Rust911 but haven't mixed it up (it turns into 16 gal for $60 delvered, link below is 1gal for about $17) or tried it on anything. I have a splash pan I want to try it on, but have to devise a container that won't take six gallons, or fix up a fluid cycle system. It would be perfect for your lock because you could dunk it in a small container pretty easily. If you try vinegar, what I read is that it looses it's power pretty quickly as it works, so you might try a fresh batch each day if a long soaking doesn't seem to help. Again, haven't tried it. http://www.rust911.com/rust911-free-shipping-16x-ultra-concentrate-rust-remover-makes-1-gallon/ -VT/JeffH This message was edited by VT/JeffH on 8-23-16 @ 2:55 PM ken ct. 08-23-2016 @ 1:30 PM reply profile send p.m. Senior Posts: 1513 Joined: Jan 2010 Try soaking in white vinegar for a few days full strength. ken ct Its supposed to dissolve rust. Its cheap and worth a try. ken ct Larry Lange 08-23-2016 @ 8:01 AM reply profile send p.m. Member Posts: 93 Joined: Jun 2011 Thanks, 40 Coupe. I don't have a key for the lock. The whole thing is rusted solid. PB Blaster, so far, hasn't helped. I could keep soaking the mechanism with it but I wondered if there's a more effective method.

<< previous || next >>

PAGE: 1 2

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

EFV-8 Club Forum Home | Back to Home Page | Contact the Webmaster

Copyright © 2009 - EFV-8.org
Powered by < CF FORUM > v.2.1