Posted By |
Discussion Topic:
50 Ford Truck heater switch removal
|
|
51f1 |
02-16-2010 @ 3:21 AM
|
|
|
Senior
Posts: 573
Joined: Oct 2009
|
My '51 heater switch knob screws onto the threaded shaft. There is no set screw. If your switch is the 2-speed Arcless switch, it's just like mine. If it is stuck, pull the shaft out, grip it w/pliers and unscrew the knob counter clockwise.
Richard
|
Larry T |
02-10-2010 @ 12:06 PM
|
|
|
Member
Posts: 6
Joined: Feb 2010
|
thanks Iguess Iwas not applyihg enough forse Larry
|
trjford8 |
02-08-2010 @ 7:05 PM
|
|
|
Senior
Posts: 4228
Joined: Oct 2009
|
Those knobs are usually connected to the shaft with a small set screw. If you don't see a set screw in the shank of the knob then it is held in with a spring that fits into a groove on the switch shaft. If this is the case then pull straight back on the knob and it should come off.
|
Larry T |
02-08-2010 @ 4:58 PM
|
|
|
Member
Posts: 6
Joined: Feb 2010
|
I would like to know how to take the heater switch apart. the control nob so i can take it out of the bracket belo the dash thanks Larry
|