Posted By |
Discussion Topic:
1937 1/2 ton pickup cab heater
-- page:
1
2
|
|
TomO |
07-01-2014 @ 6:56 AM
|
|
|
Senior
Posts: 7253
Joined: Oct 2009
|
Trixietruck, I am sure that you will get many favorable comments about the heater and its unusual cover and shape. I hope that you were able to find the manufacturer's name and model somewhere on the heater, so you can provide this information to admirers.
Tom
|
wmsteed |
06-30-2014 @ 9:40 AM
|
|
|
Senior
Posts: 613
Joined: Oct 2009
|
In my comments on 12/13, I made mention that the '39 Ford Hot water heater were used in many early Fords, to replace the undesirable manifold and/or gas heaters. I have attached a pix of the '39 heater that is in my '36..
Bill 36 5 win delx cpe
|
trixietruck |
06-13-2014 @ 10:15 PM
|
|
|
Member
Posts: 13
Joined: Aug 2013
|
Sorry, hadn't logged on in a while. So, thanks for all the info first. We are going to stick with this heater. My nephew has restored the heater cover. Looks great. Will have a radiator guy check out the core. As for replacing the core, well, we will find out. We are not going for concourse. Just a really nice restoration with authentic parts where possible.
Trixie the truck will be revived!
|
supereal |
04-16-2014 @ 7:51 PM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
When I bought my '47 convertible, it had a Chevrolet truck heater, which I replaced with the correct three door type usually installed by the local Ford dealer. Neither heater produces heat comparable to today's "climate controls", which is one reason many of us put our cars in storage during the winter. Finding a "correct" heater can be tough. I found mine in a Missouri junkyard. Fortunately, the fan motor worked, but the core needed help, and the cover had to be repaired, rust bead blasted, and correct "hammertone" paint applied the result is more for looks than function.
|
Pickup |
04-16-2014 @ 5:47 PM
|
|
|
Member
Posts: 26
Joined: Jun 2010
|
Your heater looks like one that I saw on a Chevrolet restoration project. It had the round core and it was rebuilt by the owner. I would imagine that it was very difficult to replace.
|
ford38v8 |
12-10-2013 @ 7:19 PM
|
|
|
Senior
Posts: 2762
Joined: Oct 2009
|
Mike, the heater looks interesting, and would be a keeper if you confirm one small detail: Make sure that you can replace the heater core if this one goes away. The shape being unusual, you might have a problem with that. Restoring the firewall to match this heater's plumbing might be unwise for that reason.
Alan
|
wmsteed |
12-10-2013 @ 8:15 AM
|
|
|
Senior
Posts: 613
Joined: Oct 2009
|
The '39 Ford style of hot water heater works very well in any '30 model Ford.. It was a common practice during the early/mid 1940's to add hot water heaters in lieu of the troublesome manifold and Southwind heaters.. I believe it was in about 1941 that Ford, and many other manufactures started to install their heathers in the center of the firewall.. If it was a factory heater the application usually went well, not generally the case with after market heaters.. I have owned my '36 Ford coupe for over 61 years, it has always had a '39 Ford heater mounted on the right side of the firewall.. The '39 heaters are small, taking up very little space and they are Ford correct accessories....
Bill 36 5 win delx cpe
|
Lawson Cox |
11-29-2013 @ 5:55 PM
|
|
|
Member
Posts: 18
Joined: Jan 2010
|
If you want something that is period, gives almost instant heat, install a Southwind gas heater. Simple to restore if you can locate the parts, or I know a guy who can restore it for you. Heat in 90 seconds so they say. Mine heats up faster than that. I rebuilt it using ALL NOS parts, everything that is except the outer cover. Just repainted that.
|
trjford8 |
08-20-2013 @ 8:01 PM
|
|
|
Senior
Posts: 4215
Joined: Oct 2009
|
If you went to the hot air heater you would have to drill some fairly large holes in the firewall. If you are not looking to restore the truck to 100% original I would use the existing heater. Those old heaters have actually become fairly popular and have a lot of character.
|
TomO |
08-20-2013 @ 9:43 AM
|
|
|
Senior
Posts: 7253
Joined: Oct 2009
|
To see a drawing of a 1940 hot air heater, go to page 712 of the Green Book. It is similar to the one used in 1937. Here is a link to an online version of the Green Book. http://www.norgv8club.org/norg/index.php/headliner-newsletters-and-tech-tips/category/11-parts-diagrams The hot water heater provided more heat than the hot air heater, but the hot air heater provided heat sooner. If you are going to restore the truck, you should make a decision on whether you want to show it on the Concourse or just drive it and show it at local shows. You can also show a driver at Early Ford V-8 Club meets in Touring Class. At most meets, Touring Class has just as many vehicles in it as the Concourse Class.
Tom
|