Senior
Posts: 1961
Joined: Oct 2009
|
also you might have to drop the steering column and aim it out the drivers door, or remove the rear window in the cab, which ever is easier. what ever you do ,do not bend the lightswitch rod to much,and have rags in hand when doing this, usually it is a greasey mess. The clip is a LITTLE C-clip,has a spring and a special connector bracket that is used to turn the light switch, you will have to align this later on, so make sure you write down which way it is facing,and where the horn button is facing at the same time,so you can reinstall the same way, you might want to invest in a FORD Service Bullitin Manual , or a restoration guide, to make things easier for you, well worth the money, hope this helps KEEP ON TRUCKIN 37RAGTOPMAN
|