Posted By |
Discussion Topic:
Carpet Inserts
-- page:
1
2
|
|
TomO |
01-19-2016 @ 7:22 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
I am glad that you solved your problem and could post the photos. I naturally keep my file names short, so I never had the problem.
Tom
|
bo8109b |
01-18-2016 @ 6:01 PM
|
|
|
New Member
Posts: 179
Joined: Nov 2009
|
Thanks Steve, You have been a tremendous help. Will post the outcome of my efforts a little later. Carl
|
len47merc |
01-18-2016 @ 1:08 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
Tom/all - the problem with posting the pics, found through further trial and error, was that my excessively descriptive file names were too long. Truncating them to what you see here allowed them to be posted. Never had this prob before - have always reduced to 1024 before posting but never knew there was a file name length limitation until now. Hope the pics help bo8109b - Steve
This message was edited by len47merc on 1-18-16 @ 1:10 PM
|
len47merc |
01-18-2016 @ 1:05 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
'47 Merc floor mat carpet inset side offset. Picture is a bit of an optical illusion - the offset is ~ 2 3/4".
Steve
|
len47merc |
01-18-2016 @ 1:03 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
'47 Merc floor mat carpet insert rear offset.
Steve
|
len47merc |
01-18-2016 @ 1:01 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
'47 Front mat passenger side carpet insert.
Steve
|
len47merc |
01-18-2016 @ 11:21 AM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
Thanks Tom. The pics were and are resized to 1024 but the site still will not accept them.
Steve
|
len47merc |
01-18-2016 @ 9:12 AM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
Thanks Tom. The pics were and are resized to 1024 but the site still will not accept them.
Steve
|
TomO |
01-18-2016 @ 7:44 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
Steve, try re-sizing your photos to 1024 pixels wide.
Tom
|
len47merc |
01-17-2016 @ 2:02 PM
|
|
|
Senior
Posts: 1165
Joined: Oct 2013
|
Carl - yes, the vinyl/rubber of the original floor mat is black. This original floor mat's carpet inserts are a dark beige/brown color that matches the original carpet. The corners of the inserts have a radius/are rounded. From the back of the floor mat under the front seat to the edge of the carpet insert is 6 1/2" (pic to follow) for both the driver and passenger sides. From the edge of the mat near each door to the edge of the carpet insert is ~2 3/4". The passenger side insert is `15 1/2" front-to-back and ~16 1/2" side-to-side at the back nearest the seat and ~15" side-to-side at the front edge (it is not square). The driver's side insert is ~10" front-to-back and 16 1/2" side-to-side near the seat and ~16" side-to-side on the pedal side of the insert (it also is not square). The distance from the rear edge of the mat and the side edge is the same for the driver's side as the passenger side. EDIT - Basically the outer sides of the inserts angle in toward the center of the car, following the same angles as the door and kick panels, and the inner edges are parallel. As you can see from the following photos the original mats have embossed areas and borders for the inserts to fit in and to border the inserts, respectively. EDIT: I have tried several times to attach pics to this post and a couple of others for you on this but continue to get a '500 - internal server error' notification from EFV8 when a pic is attached - never had this problem before. I will try again later to give you some defining pics. Hope this helps - Steve
This message was edited by len47merc on 1-17-16 @ 2:19 PM
|