Posted By |
Discussion Topic:
'49 merc hood letter clips
|
|
TomO |
04-20-2012 @ 8:00 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
Clem, There are many suppliers of clips, so if you strike out on the link that I gave you,try another supplier. If all else fails try a 3/8" speed nut on the larger dimension of the pin. You should also contact the Club's 49-51 Adviser to see if he has a solution.
Tom
|
janman33 |
04-19-2012 @ 10:44 PM
|
|
|
Member
Posts: 30
Joined: Oct 2009
|
Thanks for the info Tom. I looked on the link you had given me and they show 2115 fastners,non of which look like what I need. I will call them in the AM and maybe they can give me lead or have something that will work.Thanks for the picture with the measurements and all your help. Clem
|
TomO |
04-19-2012 @ 9:19 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
Here is a drawing of the nut. You can try searching for Auto body clip suppliers and ask them if they have anything that will work. Here is a link to one of them http://autobodyclips.com/index.html
Tom
|
janman33 |
04-18-2012 @ 6:41 PM
|
|
|
Member
Posts: 30
Joined: Oct 2009
|
Thanks for the info. C&G could not help, or could any of the many vendors and the local hardware said he has never seen such a retainer. These fit over oblong post that measure (approx.)1/8"W X 3/8"H x 1/4"D -Ever see such a retainer?? Odd sucker, to say the least. Mercury part #355873-S32 - I need 10 of them. Thanks again folks.
|
TomO |
04-09-2012 @ 6:58 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
Try your local hardware store. They should have speed nuts that fit.
Tom
|
supereal |
04-08-2012 @ 9:54 AM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
C&G has a large variety of clips. Look in their online catalog at www.cgfordparts.com or call at 800/266-0470
|
janman33 |
04-07-2012 @ 9:31 PM
|
|
|
Member
Posts: 30
Joined: Oct 2009
|
Can anyone tell me where I can buy the clips (or retainers) that fasten the "MERCURY" letters to the hood? Thanks guys.(and/or gals)
|