Posted By |
Discussion Topic:
Wind up clock
|
|
DMMuir |
07-23-2024 @ 9:07 AM
|
|
|
Member
Posts: 21
Joined: Aug 2020
|
Anyone with tips or experience here? The clock spins, you can adjust the time. it does not seem to want to wind. I think this is the last part of the original systems that is not fully functional and I want it to be. I plan to take it back apart and clean/lube it. hope I can get that winding mechanism moving. Been working on other car projects, and moving back to the '40 the last 2 weeks reminds me just how much fun I have with this car every time I wrench or drive it.
|
ford38v8 |
07-23-2024 @ 10:02 AM
|
|
|
Senior
Posts: 2767
Joined: Oct 2009
|
Not certain about a '40, but my New Haven wind up clock in my '38 used the same internal mechanism as the New Haven pocket watches. In any case, any clock repair shop can service your clock.
Alan
|
kubes40 |
07-23-2024 @ 11:29 AM
|
|
|
Senior
Posts: 3408
Joined: Oct 2009
|
Alan, you are spot on. The '40 clock is nearly identical in "build" as your '38.
Mike "Kube" Kubarth
|
40 Coupe |
07-24-2024 @ 5:09 AM
|
|
|
Senior
Posts: 1679
Joined: Oct 2009
|
If the tension on the winding mechanism does not increase and maybe the clock runs for a short time or not at all. It is possible the main spring is broken. Appears you need some service.
This message was edited by 40 Coupe on 7-24-24 @ 5:10 AM
|
Coupe-de-grace |
07-29-2024 @ 12:09 AM
|
|
|
Member
Posts: 1
Joined: Jul 2024
|
I just bought my first 40 coupe and it has the clock. It works but I haven't yet found the right position of that slider on the back to make it keep accurate time. I'm assuming that slider is a speed control. Do I assume correctly? Also, how often should we have to wind it, if it's working properly?
Happy motoring, Gregory
|
37RAGTOPMAN |
08-29-2024 @ 4:26 PM
|
|
|
Senior
Posts: 1965
Joined: Oct 2009
|
if the clock is over wound, with clock removed, rock the clock back and forth. and see if it starts ticking, the escapment wheel is the one that rock back a forth. releases the spring tension, I usually spray with wd40, to make sure it is lubricated, hope this helps 37 Ragtopman , Maine I cannot tell you how many I repaired doing this
|