Posted By |
Discussion Topic:
Driver door latch spring
-- page:
1
2
|
|
TomO |
11-09-2021 @ 6:31 AM
|
|
|
Senior
Posts: 7250
Joined: Oct 2009
|
There is a screw holding the handle on. It can be accessed from the edge of the door at a spot even with the handle.
Tom
|
classiclover |
11-08-2021 @ 8:32 AM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
Hi Mike Trying to take off outside door handle. Is there a procedure I need to follow to get it off. It isnt obvious to me. I am sure it is simple, but---- Thks again Dale
|
classiclover |
11-07-2021 @ 3:40 PM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
OK Thks Mike I shall endeavor to percervere Dale
|
kubes40 |
11-07-2021 @ 2:17 PM
|
|
|
Senior
Posts: 3394
Joined: Oct 2009
|
Nope, not a thing to interfere...
Mike "Kube" Kubarth
|
classiclover |
11-07-2021 @ 10:23 AM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
Mike Do I need to do anything to the window assembly to get to the latch assy. Sorry for being a pest on this, but I am on a steep learning curve Dale
|
kubes40 |
11-06-2021 @ 8:58 AM
|
|
|
Senior
Posts: 3394
Joined: Oct 2009
|
Dale, If by chance you do break a tab or two, don't fret. You can tack weld the assembly together.
Mike "Kube" Kubarth
|
classiclover |
11-06-2021 @ 6:29 AM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
Mike Thanks much. I will proceed as advised Dale
|
kubes40 |
11-06-2021 @ 5:41 AM
|
|
|
Senior
Posts: 3394
Joined: Oct 2009
|
Dale, It's actually a fairly easy task. There are a number of small tabs that must be bent upward in order to open both the latch mechanism and the remote mechanism. It's imperative that you heat the small tabs red hot directly prior to bending them. If you don't the chance of them breaking is nearly 100%. I suggest you heat them when reinstalling as well. When you begin to disassemble the parts, you may want to photograph what you have. Or, most likely your memory is better than mine and that won't be necessary. That's about it
Mike "Kube" Kubarth
|
classiclover |
11-05-2021 @ 12:30 PM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
Greetings Mike I will need your input on changing out the door latch springs. Any insight you can provide will be appreciated. I continue to learn and it seems like on an accelerated basis, but enjoy every project Thks again Dale
|
classiclover |
11-05-2021 @ 9:06 AM
|
|
|
Member
Posts: 73
Joined: Aug 2021
|
Thanks much Mike, Ordered the parts Dale
|