Posted By |
Discussion Topic:
quarter window seals
|
|
Barney |
10-11-2019 @ 3:55 AM
|
|
|
New Member
Posts: 107
Joined: Nov 2015
|
Hello Ford Lovers, I have a 1940 standard Fordor. I'm replacing all the glass and their seals. I have all the glass and seals except the rear quarter window seals. They are not available at Mac's and they are not in Dennis Carpenter's catalog, although both have the seals for the quarter windows for a coupe (the Fordor quarter windows are a bit larger then the coupe's). I could buy two sets of seals for the coupe windows and 'splice' them together so they'll be long enough for the larger Fordor windows. Any other ideas would be appreciated. Regards, Barney
|
trjford8 |
10-11-2019 @ 7:31 AM
|
|
|
Senior
Posts: 4232
Joined: Oct 2009
|
Check with other V-8 vendors who may have some in stock.. Also check with Steele Rubber Products or Metro Moulded Products (Google is your friend) as they may make them. Those seals used to be available and were reproduced. It's possible some vendor has them on the shelf.
|
srg |
10-20-2019 @ 3:27 PM
|
|
|
Member
Posts: 66
Joined: Feb 2019
|
I got the quarter window seals for my 1937 (they open & close) from Metro Moulded parts Coon Rapids , MN. I bought them through another "Old Ford" parts vendor who ripped me off so buy direct. NOBODY had the ones I needed, so I'm sure they would have what you need.
|
MG |
10-20-2019 @ 8:31 PM
|
|
|
Senior
Posts: 1262
Joined: Nov 2009
|
Metro Moulded Parts > https://www.metrommp.com/ 11610 Jay Street NW • Minneapolis, MN 55448 (800) 878-2237 • Fax: (877) 399-2562 © 2016 Metro Moulded Parts Inc.
This message was edited by MG on 10-20-19 @ 8:33 PM
|