Posted By |
Discussion Topic:
1932 floor boards and mats
-- page:
1
2
|
|
3w2 |
02-21-2011 @ 5:46 PM
|
|
|
Senior
Posts: 835
Joined: Oct 2009
|
Brad, Roy's floor boards are perfect and conform to the original engineering drawings right down to the direction of the grain in the plywood. Rubber front mats for '32s have been out of production for a couple of years now. The best you can do for the present time is to post 'wanted' ads on this site and on fordbarn.com and keep an eye on eBay listings. There are lots of excellent reproduction '32 inside door handles out there for sale (along with the '33-'34 type which you have been avoiding). At any point in time during the '32 model year, standard model inside door handles were the same as the deluxe versions (except those used on deluxe coupes for most of the model year). Try dickspadaro.com; he knows the difference. Out of curiosity, what is a "18-73A"; a body type designation, perhaps? Dave
|
trjford8 |
02-21-2011 @ 2:02 PM
|
|
|
Senior
Posts: 4214
Joined: Oct 2009
|
Brad, I can't help with the floor mat , but you should get the floorboards from Roy Nacewicz. His boards are very correct. He can be reached at; www.fordbolts.com.
|
BRL3240 |
02-21-2011 @ 1:25 PM
|
|
|
Member
Posts: 15
Joined: Feb 2011
|
I have a June 18-73A. Original car, with original drive train and original interior. The car is like a time capsule, original mohair and even original exhaust, which leads me to believe that the 23,000 miles on the speedo, is not 123,000. Well interior wise, I'd like to put a nice set of front floor boards and floor mat in the car. It currently has a sheet of half inch plywood that someone masterfully made but isn't correct. I am wondering where I should go to get a set of floor boards, or must I make them. Also who sells the rubber floor mat for a 32 standard? Another interior item to tackle is that one of the doors is missing the inside door handle. I have looked around but haven't been able to find a reproduction one that is for a standard. They seem to have a two ridge pattern. I have an interior photo, I know its not a close up, I will upload a close up when I get a chance. Brad Lowery
This message was edited by BRL3240 on 2-21-11 @ 1:27 PM
|