Posted By |
Discussion Topic:
32 to 36 21 stud gaskets
|
|
nwjm |
01-18-2024 @ 8:19 AM
|
|
|
Member
Posts: 44
Joined: Dec 2023
|
Would anyone have a used set of head gaskets? Condition doesn,t need to be perfect. Due to lack of storage, I plan to set the heads on the block so bare cast doesn,t sit on cast. I can,t use strips of wood or washers because humidity could cause rust.
|
carcrazy |
01-18-2024 @ 10:58 AM
|
|
|
Senior
Posts: 1651
Joined: Oct 2009
|
Why not just use new head gaskets? Or you could spray the mating surfaces with WD-40 and place cardboard pieces between the heads and the block.
|
nwjm |
01-23-2024 @ 11:30 AM
|
|
|
Member
Posts: 44
Joined: Dec 2023
|
carcrazy, thanks. I found some bristle board although thin. I prefer to use grease or vaseline on both metal surfaces rather than WD 40. I have used cereal boxes before when length is not a problem.
|