Posted By |
Discussion Topic:
`36 rumble rubber
|
|
johnpoly |
01-09-2010 @ 8:00 AM
|
|
|
Member
Posts: 39
Joined: Oct 2009
|
My 1936 Cabriolet is undergoing a restoration. I have new rubber to install in the rumble lid. Is the rubber to be installed on the lid and the channel on the body, or just on the lid? Thanks to all. John
|
G Tosel |
01-09-2010 @ 4:03 PM
|
|
|
Member
Posts: 92
Joined: Oct 2009
|
There are two sizes of the rubber seal and one does go in the lid and the other goes into the channel in the body. Check Bob Drake catalog for details. Note the correct U-shape installation shown. Gary Tosel
|
bondo |
01-11-2010 @ 4:15 PM
|
|
|
Member
Posts: 4
Joined: Jan 2010
|
no rubber in the channel if you plan to show if you do dont glue it and you can just pull it out
|
bondo |
01-11-2010 @ 4:16 PM
|
|
|
Member
Posts: 4
Joined: Jan 2010
|
no rubber in the channel if you plan to show if you do dont glue it and you can just pull it out
|