Posted By |
Discussion Topic:
1938 deluxe coupe storage area behind seat
|
|
StewyQ |
06-03-2012 @ 2:24 AM
|
|
|
Member
Posts: 16
Joined: Jun 2010
|
Thanks for the reply trjford8. I have that bit you have coverd worked out . there are two cardboard panel that seal this storage area from the boot.It is where the cardboard panels meets the upholstered quarter panel this is my problem . how were they held in place there must be a wooden frame here also . there is a photo on page 3-46 [F 23 photo} in the 38-39 book by Gary Mallast . my seat his hinged at the top and lifts up to get to this storage area. Thanks Stewart Quertier.
|
trjford8 |
05-31-2012 @ 7:48 PM
|
|
|
Senior
Posts: 4232
Joined: Oct 2009
|
The package shelf is 5/8 plywood. Just to the right of the drive tunnel there is a bracket on the floor . There is a wood brace that goes from the floor bracket to the bottom of the package tray. The brace is attached to the shelf with an "L" bracket. The wood brace is approximately 3/4 inch X 3 inches and it supports the front edge of the package tray.
|
StewyQ |
05-27-2012 @ 9:46 PM
|
|
|
Member
Posts: 16
Joined: Jun 2010
|
Can any body help with a plan of the frame for the storage area behind my seat. I have the metal brackets that are fixed to the sills on each side and the one in the middle of the floor . is there a wood frame that is fixed to these brackets . also it must be fixed to the under side of the rear storage tray. Thanks Regards from New Zealand Stewart Quertier.
|