Posted By |
Discussion Topic:
unknown parts
|
|
heckertken |
10-24-2011 @ 8:53 AM
|
|
|
Member
Posts: 23
Joined: Jun 2011
|
Is there anyone who can tell me what these parts are and what year they are for?
|
heckertken |
10-24-2011 @ 8:56 AM
|
|
|
Member
Posts: 23
Joined: Jun 2011
|
I don't know what these parts are either.
|
37RAGTOPMAN |
10-24-2011 @ 5:19 PM
|
|
|
Senior
Posts: 1965
Joined: Oct 2009
|
the size of the items might be of help, in figuring out what they fit. it hard to tell is they are 1 inch long or 1 foot,?? and were exactly they came from. in the trunk ? any part numbers ? my 3 cents 37RAGTOPMAN
|
drkbp |
10-25-2011 @ 3:38 AM
|
|
|
New Member
Posts: 180
Joined: Aug 2010
|
heckertken, They are the castings attached to the top irons. Make the curve above the rear corner of the door window. They look like the ones on my '38 Cabriolet so probably work on '37 - '39 cabriolets. One on the top and meets one on the back section to "frame" the rear corner. May work on others too, I don't know. Ken in Texas
|
heckertken |
10-25-2011 @ 6:46 AM
|
|
|
Member
Posts: 23
Joined: Jun 2011
|
The parts were in a box when we got the car. The two parts in the first picture look like they have rubber?? on the ends. they are about 3 1/2" long. Theparts in the second picture do not have the rubber end?? and they are a little longer.
|
heckertken |
10-25-2011 @ 6:49 AM
|
|
|
Member
Posts: 23
Joined: Jun 2011
|
Are all four parts castings?
|
drkbp |
10-25-2011 @ 9:37 AM
|
|
|
New Member
Posts: 180
Joined: Aug 2010
|
You have enough for both sides. One with and one without the rubber made a set. The rubber between made the seal. Ken in Texas
|
heckertken |
10-25-2011 @ 11:47 AM
|
|
|
Member
Posts: 23
Joined: Jun 2011
|
Thank you Ken
|