Post to the EFV-8 Forum
Post Classified Ads
Shop the Online Store

User Login

Not Registered Yet? Click Here to Sign Up!

Early Ford V-8 Club Forum

FORUM RULES: Users agree to these Rules when using Forum.

The site administrator reserves the right to change the terms and conditions of the user agreement without prior notice to the user. It is the responsibility of the user to regularly review the terms of this agreement.

The user agrees to the following terms:

All information that you provide to us for your membership is correct.
You will not use your membership to spam, harrass, or exploit other members in any way.
Vulgar, Abusive, Racist and Sexist Language will not be tolerated.
Commercial-type sales postings will not be allowed.
No mass posting or flooding of the boards is allowed.
No Advertising of parts or cars; no Ebay or business/commercial ads (please use the "Classified" for ads Wanted or For Sale).
VIEWING MULTIPLE TOPICS ON SCREEN: You can choose to see more than 10 Topics at a time ... Log In and choose "Preferences" from the top bar on the Forum page. Scroll down and Change the "Default Topics Returned" parameter to 25 or 50, and save the changes. Since this setting is stored in your browser 'cookies' (if enabled), it seems to use that stored value even if you are not logged in. So, if you use a PC that you haven't logged into the forum from, the setting still seem to remain at the default.
EXTERNAL PHOTO LINKS ON FORUM: You can still use external photo links in your posts on the new forum. They follow the rules of any link in that they have to have the URL link qualified down to the full image file name (example: .jpg). The links will open in a new browser window, the same as an uploaded image attached to a post. Since an image attachment to any post does not display inline with the post, the results are the same. You can use multiple external links within a post. This link is from photos on a site from Don Clink's 'Deuce@75' albums:

http://donclink.com/deuce_75_1/images/dscn2950.jpg

Using links from photo sites such as Photobucket can help in "size" issue with uploaded attachment files. For best viewing in web browsers, photos should be around the 800x600 pixel range, and probably not more than 1024x768. Most cameras today store HUGE jpg image files, as the default settings are in the 7, 8, 10, and 12Mb image sizes. The image files that are then attached are very large, and the browser can't display the full image size without using the scroll bars. Use the re-sizing functions of your photo editing software to reduce the image to 800x600, which reduces the file sixe and the image load time in the browser. Don uses Google's free Picassa3 software, which is an excellent photo management product. All of the photo albums of the Deuce, Grand National, and Auburn that are links on the NORG site were built using Picassa's web creation functions. And it's free? (THANKS to Don Clink for the info!)
HOW DO I SHOW MY EMAIL ADDRESS ALONG WITH MY USERNAME? You can LogIn on the Forum, and select PREFERENCES. On this page Members can add optional information such as their City,State, Country; Occupation; Hobbies: list a Homepage; list AOL Instant Messanger Handle; Signature; "Make Email Address viewable to others;" and even change the number of Default Topics shown on a page. WHEN others click on your profile, they will see this information.

EFV-8 Club Forum / General Ford Discussion / Fan to Radiator Clearance Concerns

Reply to Discussion | New Discussion

<< previous || next >>

Posted By

Discussion Topic: Fan to Radiator Clearance Concerns

BIRUDY

11-30-2024 @ 10:03 AM

reply profile send p.m.

Member
Posts: 37
Joined: Jun 2022

Thankyou Alan,
looked at the 35 intake and can see the difference.. should solve my problem.

ford38v8

11-29-2024 @ 7:21 PM

reply profile send p.m.

Senior
Posts: 2812
Joined: Oct 2009

Use your 35 bolt-ons. Fan & generator mount on the intake manifold are different.

Alan

BIRUDY

11-29-2024 @ 5:54 PM

reply profile send p.m.

Member
Posts: 37
Joined: Jun 2022

will check that possibility out.. did install new engine mounts as well as new transmission mount as original was in poor shape..
Will ensure that that engine is not sitting askew because of that consideration.

This message was edited by BIRUDY on 11-29-24 @ 5:57 PM

37RAGTOPMAN

11-29-2024 @ 3:40 PM

reply profile send p.m.

Senior
Posts: 1977
Joined: Oct 2009

HI Rudy
was wondering how the rear trans engine mounts are, ?
looks like the engine is tilted on a angle
what I did was use a adapter to use a modern coil and a flat plate on the distributer
they sell these for about $40.00
if the back of the engine was raised it better for clearance
I did this exact same thing in the 1980s with no problems. for a customer,
hope this helps 37RAGTOPMAN,MAINE

BIRUDY

11-29-2024 @ 11:41 AM

reply profile send p.m.

Member
Posts: 37
Joined: Jun 2022

Yes will do.. appreciate the advice and reason.

zeke3

11-29-2024 @ 11:30 AM

reply profile send p.m.

Member
Posts: 85
Joined: Apr 2011

Not related to your clearance questions, I recommend that you pull the rubber sleeves on the spark plug wires up so that they fit into the metal conduit for the spark plug wires. This should seal the joints so no water can get in there and fill up the distributor caps.

kubes40

11-29-2024 @ 9:26 AM

reply profile send p.m.

Senior
Posts: 3448
Joined: Oct 2009

Rudy, this is an easy swap. Methinks you should install the '35 distributor and coil. From your photo, it appears there is plenty of clearance between the fan and distributor. The clearance to the coil is tight.

Mike "Kube" Kubarth

BIRUDY

11-29-2024 @ 7:07 AM

reply profile send p.m.

Member
Posts: 37
Joined: Jun 2022

Engine swap has been completed in my 35 Coupe.
Installed a 1937 21 stud to replace original early 35 21 stud.
Generator mounted cooling fan is giving me concerns..
A little background : the fan from the 35 engine provided clearance from rad but not the distributor.
tried a fan from 60hp flathead.. has a longer neck ..still no clearance to distributor.
Had a spacer machined to use the original 35 fan...
The spacer and 35 fan is installed and does provide clearance in both areas of concern.. BUT the clearance is minimal.
Have about 1/8" clearance from the distributor....
Have about 1/4" clearance from the radiator....
I have tired fan belts of various lengths to raise generator to enhance the clearance ..
Because the radiator is slightly canted back at the top.. as the generator is raised to tighten fan belt the closer the fan gets to the rad..
I have elected to stay with the shortest belt to achieve the best compromise.
Looking for reassurances that amount of clearance I have achieved and mentioned above are workable.
(Let me know if I am being too brave ... have not started the engine yet)
I have thought about looking and addressing the issues with the original engine and swapping it back..
Considering the costs of flathead fixes/rebuilding.. don't want to bury myself financially...engine has sat for at least 30 years
I have taken the 35 engine apart to inspect .. has babbit mains and inserts in the connecting rods.. cast iron heads in good shape.. #4 piston was tight to move due to a little ridging on top of cylinder .. minor corrosion on associated valves.. all components move.. some valve stems a little tight in the guides.. has adjustable tappets.. and tappet gallery has been drilled to assist in holding tappets during the adjustment exercise. Tappets are odd to me as they don't have the oval cut outs in their side surface to accommodate the easier adjustment.. they have a horizontal groove around the whole tappet.
Visual inspection of engine block doesn't appear to have any cracks.. ( save the little ones you see that you find between center studs and water jacket holes)
Will upload some pictures of the fan clearances..
Appreciate any advice or comments, thanks Rudy

This message was edited by BIRUDY on 11-29-24 @ 7:31 AM

<< previous || next >>

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

Early Ford V-8 Club Forum

Merchandise Questions

Membership Questions