Posted By |
Discussion Topic:
1946 ford 2 dr hood hinges
-- page:
1
2
|
|
fatso2114 |
08-26-2022 @ 5:35 PM
|
|
|
Member
Posts: 55
Joined: Oct 2016
|
Silverchief that was it had a loose bolt went around and retightened the arm bolts and the hood now stays open like it should thanks for the great advice the forum works well,John
|
supereal |
08-20-2022 @ 11:13 AM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
The design of the 42-48 hood hinges drops the cowl end on the hood just as the front engages the safety catch. Any wear of hinge, particularly the pivots, will interfere with the hood closure. On my '47 I ordered a new set of hinges from C&G after spending way too much time trying to make the originals work correctly. The part number is 51A-16782/3. Catalog shows price as $$79.95. Order # is (800) 266-0470.
|
fatso2114 |
08-18-2022 @ 11:17 AM
|
|
|
Member
Posts: 55
Joined: Oct 2016
|
Thank you all for your advice,allways a great help,John
|
woodiewagon46 |
08-18-2022 @ 7:18 AM
|
|
|
Senior
Posts: 704
Joined: Nov 2012
|
When I open the hood on my '46 Woodie the measurement is about 30" and stays at 30".
|
51woodie |
08-17-2022 @ 12:53 PM
|
|
|
Senior
Posts: 517
Joined: Jan 2017
|
silverchief. Can you give a measurement as per my description in my previous post, so I can compare to my '46? It would be appreciated. Thanks, 51woodie
|
silverchief |
08-17-2022 @ 12:18 PM
|
|
|
Senior
Posts: 522
Joined: Oct 2009
|
Had the exact same problem with my 46. Used a wood rod for years to hold it open. Brain storm one day led me to simply really tighten all bolts connected to the hinges. Now it stays open very nice.
|
woodiewagon46 |
08-16-2022 @ 2:21 PM
|
|
|
Senior
Posts: 704
Joined: Nov 2012
|
If you log onto, Mark's 1941-1948 Ford Parts and click onto "articles" is a complete section on how to adjust the 1941-1948 hood. The article is very informative and is the same article that was in the V-8 Times.
|
fatso2114 |
08-15-2022 @ 4:03 PM
|
|
|
Member
Posts: 55
Joined: Oct 2016
|
Thanks I bought my springs from Mike dreskell in tenn not sure if there China,will contact obsolete to see what hey have,John
|
37RAGTOPMAN |
08-15-2022 @ 10:16 AM
|
|
|
Senior
Posts: 1963
Joined: Oct 2009
|
was wonering if you used NOS hood springs or REPOPS ? [ china ] did the hood open all the way before ? if not NOS SPRINGS, try SOUTHSIDE OBSOLETE in MINN , see if Fred has some NOS hope this helps 37Raggtopman
|
51woodie |
08-15-2022 @ 7:03 AM
|
|
|
Senior
Posts: 517
Joined: Jan 2017
|
The hood on my '46 Super Deluxe Coupe opens to 30" between the under side of the hood nose, to the hood latch area on the front clip. When I let it go, it relaxes to an opening of 26". I don't know what is considered normal, but that's what my hood does.
|