Posted By |
Discussion Topic:
35 Convertible Sedan Rear Wooden Bow
|
|
Peter in NH |
03-22-2021 @ 4:34 AM
|
|
|
Member
Posts: 42
Joined: Oct 2009
|
I recently bought a new rear bow for my 35 convertible sedan and I'm trying to decide where I need to drill the hole for the special center fasteners that help to secure it to the metal frame. I had my original bow but made the mistake of sending it to the fellow that reproduces them but it was lost in transit and I never got it back. Can someone that still has an original rear bow in their car please give me an accurate measurement from the ends of the bow to the centers of the middle fasteners? As the other two fasteners on each side are simply wood screws it'll be easy to establish their location after installing the bow. Any help will be greatly appreciated. Peter
|
37RAGTOPMAN |
03-23-2021 @ 7:35 AM
|
|
|
Senior
Posts: 1958
Joined: Oct 2009
|
hi Peter in NH did you try going though the EARLY FORD V8 roster and reached out to another member ? with same car, If they can help you., hope this helps 37Ragtopman ,Maine
|
Peter in NH |
03-23-2021 @ 5:14 PM
|
|
|
Member
Posts: 42
Joined: Oct 2009
|
37Ragtopman, Maine. Thanks for the suggestion. Peter
|
35fordman |
03-24-2021 @ 6:02 AM
|
|
|
Member
Posts: 25
Joined: Oct 2009
|
Peter My original bow 35 measures 4 - 3/16 from end of bow to middle of the threaded fastener.
|
Peter in NH |
03-26-2021 @ 4:16 AM
|
|
|
Member
Posts: 42
Joined: Oct 2009
|
35fordman thank you very much for taking the time to measure your original bow for me. Peter
|