Posted By |
Discussion Topic:
Flathead v8 value
|
|
1934 Ford |
10-22-2018 @ 6:33 AM
|
|
|
Senior
Posts: 574
Joined: Oct 2009
|
Most flathead engines in the $200-$300 range are not worth that. I always wonder why any good engine was taken out. there is usually a reason. If i was to make one of my V8's in to a street rod, I'd sell the engine before I took it out, allowing the buyer to drive it. That's the way I bought my spare 21 stud engine.
1934 Ford's since 1972
|
Paranyos |
10-21-2018 @ 5:14 PM
|
|
|
Member
Posts: 3
Joined: Oct 2018
|
Thanks for the input! He is asking too much, I am going tp pass.
|
1942deluxe |
10-21-2018 @ 10:16 AM
|
|
|
Member
Posts: 98
Joined: Oct 2009
|
I have a 59 AB (1947) engine that is complete except for the generator and starter. Turns over easily and was supposed to be from a running vehicle. I paid $500 for it five years ago. Also have a torn down 59 AB with a block that was supposed to have been crack checked. Probably would let the whole works go for $500 as we may be getting ready to move. I'm about 250 miles from you on the eastern end of the state. In our area you would have a rough time finding a complete engine that's been stored in a warm dry place for $200. Understand the concerns of finding cracks, ect. but just giving my opinion.
|
40cpe |
10-20-2018 @ 7:51 PM
|
|
|
Member
Posts: 477
Joined: Jan 2010
|
If you can't inspect it, don't pay any more than you can afford to loose. The flatheads are prone to cracks around the valve seats and if left to freeze they will crack around the pan rails and exhaust ports, among other places. They might still run with these conditions but will exhibit bad habits. If the block is good but worn out, it can be rebuilt but parts and machine work is expensive. Also, you don't mention manifolds, carb, distributor, fuel pump, etc that must be added for a running engine. Add it up
This message was edited by 40cpe on 10-20-18 @ 7:53 PM
|
Paranyos |
10-20-2018 @ 5:40 PM
|
|
|
Member
Posts: 3
Joined: Oct 2018
|
No way to test it. No guarantee, just a nice guy who says it is good.
|
cliftford |
10-20-2018 @ 5:29 PM
|
|
|
Senior
Posts: 845
Joined: Jan 2014
|
Looking good means very little. Unless you have the history of the engine, an d/or can hear it run it is hard to put a value on it. It would help if you could do a compression testand a vacuum test and oil pressure testi f it is running.
|
Paranyos |
10-20-2018 @ 5:01 PM
|
|
|
Member
Posts: 3
Joined: Oct 2018
|
Guys, I am looking for opinions on a fair price for a 47 ford flathead v8 engine. A guy I know has a block with heads, flywheel and starter for sale. The engine looks good and is not seized up. What would be a fair price to pay? Thanks for your input! Paul
|