Posted By |
Discussion Topic:
Fuel Pump
|
|
JohnA |
01-02-2018 @ 10:30 AM
|
|
|
Member
Posts: 281
Joined: Dec 2009
|
I"m ready to install my rebuilt fuel pump on my 239,should the fuel pump push rod be in the down position,or does it matter.Johna
|
40cpe |
01-02-2018 @ 10:32 AM
|
|
|
Member
Posts: 475
Joined: Jan 2010
|
It is easier with the rod in the lowest position. You will have to push down against the pump spring to install the bolts if it is in the up position.
|
JohnA |
01-02-2018 @ 10:39 AM
|
|
|
Member
Posts: 281
Joined: Dec 2009
|
Gotya,Thanks Johna
|
ken ct. |
01-02-2018 @ 11:16 AM
|
|
|
Senior
Posts: 1513
Joined: Jan 2010
|
Rod only moves up an down .200" or so, so it isn't much,you still have to push down on the pump to catch the bolts. ken ct
|
supereal |
01-02-2018 @ 1:40 PM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
I remove the pump stand and install the pump before replacing the stand and pump assembly. It saves time and effort. Rod position isn't important as long as you get it in the cup on the pump arm.
|