Posted By |
Discussion Topic:
studs vs cap screws
|
|
MrHenderson |
09-04-2024 @ 7:17 AM
|
|
|
Member
Posts: 19
Joined: Jul 2024
|
My memory of the water pumps is that each had 2 studs w/nuts and one cap screw. I have not been able to prove of disprove that in the '28 - '48 chassis book.
|
zeke3 |
09-04-2024 @ 12:29 PM
|
|
|
Member
Posts: 82
Joined: Apr 2011
|
I have only seen capscrews used on the water pumps that are mounted in the block.
|
carcrazy |
09-04-2024 @ 12:33 PM
|
|
|
Senior
Posts: 1699
Joined: Oct 2009
|
Don't know what year engine you have but 24 Stud Flathead V-8's from 1938 and later use 4 bolts to retain each water pump to the engine block. One of these bolts is "hidden" inside the lower water hose inlet nipple. It is recommended to use a stainless steel bolt for this location to ease the replacement of the water pumps in the future.
|
MrHenderson |
09-04-2024 @ 8:23 PM
|
|
|
Member
Posts: 19
Joined: Jul 2024
|
Yes, my oversight for not writing 21 stud engine, pumps in the head. It's been a long time since it was taken down. I have the memory of studs, and now it looks logical to have 2 studs in the closed holes & 1 cap screw in the outboard hole. But I haven't found a box with the 3/8 inch studs. Maybe when I had the engine rebuilt I didn't notice that they were gone. I do remember that hidden bolt in my '47 engine though. Thanks!
|