Posted By |
Discussion Topic:
VIN on 40 Deluxe
|
|
richard.t |
02-01-2010 @ 4:52 PM
|
|
|
Member
Posts: 1
Joined: Feb 2010
|
Mike, We just acquired a 1940 Ford Deluxe Coupe and need help in locating the vehicle ID # so we can show it to State of Florida Vehicle Registration office. They will not accept the previous owner's registration and want to verify ID # against our documentation. Is it under the engine block? It's not on door panel stamp. Thanks, R
|
curts41 |
02-01-2010 @ 5:55 PM
|
|
|
Member
Posts: 32
Joined: Nov 2009
|
Richard, The vin is stamped into the top of the drivers side frame rail midway between the radiator and fire wall. It is stamped pretty crudely and is a little hard to see if it has not been cleaned in that area for a while. The number should start with a star. I too went through this just recently here in Cal. Good luck Curts 41
|
kubes40 |
02-02-2010 @ 4:31 PM
|
|
|
Senior
Posts: 3408
Joined: Oct 2009
|
Hi Richard, Curt's reply was correct. The number was hand stamped in the left frame rail somewhere between the cowl and the front cross member. I have found most (but not all) to be closer to the cross member than the cowl. As it was hand stamped, it is often difficult to see. I suggest steel wool to remove whatever paint, surface corrosion, etc. is atop the numbers. Once you've located it, a light sanding and a little oil will make the recesses 'raise' a bit for better inspection. If I can ever be of any further help, simply let me know! Mike Kubarth
|