mikalist | -- 07-20-2010 @ 9:55 PM |
I'm checking out the torque that was used on my Model B 4 cylinder engine, supposedly rebuilt but has never been fired up. I pulled the pan and checked #2 rod cap and it registered 80 lbs. I was wondering if anyone could tell me what is proper for the rods and the mains. I believe the Model A torque on rods is 40 to 50 lbs.
|
|
supereal | -- 07-22-2010 @ 8:12 AM |
If you have the "castellated" nuts on the rods (with the cotter pins), 35-40 ft lbs. For self locking, 40-45. Main bearings are 75-80.
|
|
mikalist | -- 07-22-2010 @ 8:31 PM |
Thanks to you with that info, now I can button it up!!!
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=19&Topic=1583 |