| dkjB-24 | -- 03-04-2010 @ 10:38 PM |
|
This is to advise past, present and future V-8ers, that I still do in fact rebuild vacuum wiper motors. Been doing it for 30 years. I specialize in doing the open car wiper motors (CHROME) if you will. If you have an open car wiper that needs rebuilding, contact me first before sending it out to the plater, so I can check it out first, and prepare it,and mask it before it goes to the plater. If you send it out for chroming before I do my prep and masking, the chances are that it may not be a rebuildable unit. It may save you some money, a chrome job, and me many hours. I will only send it to a chrome plater of your choice and will not be responsible for the chrome work. If you presently have a chromed motor that doesn't work properly, I will be glad to take a look at it to see if it can be rebuilt to working order. Let me know if you have any questions about vacuum wiper motors. It is much easier to email me directly for a quicker response. I'm presently in So.California now, but will be back in Redmond Oregon someime in April. Email: qajk38@bendbroadband.com Ph. 760-251-4383(CA) 541-923-4319(OR). Cell- Which doesn't always work in California 541 350-7426 Thanks, Kent Jaquith
|
|
| jerry.grayson | -- 03-05-2010 @ 8:19 AM |
|
I can vouch for the quality and helpfull skill that Kent has and he will go out of his way to help you. He found and beautifully restored a wiper motor for my 34 station wagon.This motor is one of a kind and after looking everwhere, I found Kent. Ficken was no help and did not seem interested.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=895 |