| ken ct. | -- 05-04-2015 @ 10:09 PM |
|
The die-cast part has the 2 ridges and the pump mount is the short (like 37-48) and has the 3/4" diam bottom pipe , BUT here is the kicker the black top breather pipe on top is approx. 12-14" tall with a about a 20 degree bend in the middle of it and a short 3/4" smaller pipe welded in at a right angle to the upper pipe (like for a PVC system maybe). Looks all factory. possibly Lincoln or commercial maybe COE. HELP. thanks for any help on this ken ct.
|
|
| ken ct. | -- 05-05-2015 @ 5:36 PM |
|
I cant imagine 59 views on this NOBODY KNOWS what this is what a helpful place this is !!!!!!!!!!!!!!!!. ken ct.
|
|
| Drbrown | -- 05-05-2015 @ 9:21 PM |
|
Ken .... can't imagine. Would love a photo of it.
|
|
| ken ct. | -- 05-05-2015 @ 10:15 PM |
|
I'll clean it up and restore it and see what I can do about pics,thanks DR ken ct.nxt couple of days pretty busy rt now and have to get the sister-inlaw to take them and forward them by your email (need that) igadore@sbcglobal.net This message was edited by ken ct. on 5-5-15 @ 10:19 PM
|
|
| ken ct. | -- 05-06-2015 @ 10:25 AM |
|
All cleaned up and repainted looks real pretty. Part # on it is 48-9416 NO such # in the green bible clostest is 48-9415 which is a FP adaptor but I take it it's for the shorter common one. This adaptor I have has the relief on the bottom as for a baffle but has the smooth sides (no 2 ridges on it) ??????. Im not big on pics any more guesses on what this is from. Its definitely ford. ken ct HELP
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=8479 |