| blarge | -- 11-04-2014 @ 5:47 PM |
|
What brand and type of sealant is the best to use when installing the head studs on the 59A engine in my 48 Mercury. I want to seal the threads at the block so the antifreeze will not seep into the area between the stud and the hole in the head and out from under the stud nut. Thanks, Bill Large
|
|
| alanwoodieman | -- 11-04-2014 @ 7:35 PM |
|
I use permatex 2 nonhardening
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=7892 |