| Czech48 | -- 02-02-2014 @ 9:38 AM |
|
Hello Please, where exactly is the rear fender brace. Do you have any photo. Thank you very much
|
|
| supereal | -- 02-02-2014 @ 1:23 PM |
|
The rear fender brace was shared by '35 and '36. The Ford part number is 48-16341. The green book lists it as being replaced in service by 68-16341, but for the '37 sedan delivery and station wagon, which would be rare.I don't have a picture, but C&G lists them in their catalog, $25. 800/266-9470
|
|
| CaliforniaBorn36 | -- 02-02-2014 @ 6:26 PM |
|
The attached picture is of the passenger rear fender brace on my 1936 Fordor. It is bolted through the fender and frame in the first 'fender' hole rear of the shock. It is positioned so that it goes straight up and bends out toward the fender just under where the rear light wiring feeds through. It curves down along the inside of the fender and is attached to a tab on the bottom edge of the fender just behind the wheel opening. Hope this is the information you need.
|
|
| Don Rogers | -- 02-03-2014 @ 9:03 PM |
|
Here's a shot of the rear fender brace on the passenger side of my 35 conv sedan. Hope it helps.
|
|
| Czech48 | -- 02-03-2014 @ 10:28 PM |
|
Gentlemen, thank you very much for your help.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=6972 |