| Art | -- 05-07-2013 @ 10:25 AM |
|
I need to find the bolt torque to install an aluminum intake on my 1939 flathead V8 85 hp engine.
|
|
| TonyM | -- 05-07-2013 @ 2:04 PM |
|
Try this link: http://www.vanpeltsales.com/FH_web/flathead_home.htm . . . 78-73B
|
|
| supereal | -- 05-07-2013 @ 7:13 PM |
|
My manuals don't specify an "official" torque value. Snug down the bolts in a criss-cross pattern, starting at the center. Avoid overtightening, as it will distort the gasket, causing leaks.
|
|
| TonyM | -- 05-08-2013 @ 4:45 AM |
|
Here are the torque values: http://www.vanpeltsales.com/FH_web/flathead_torquespecs32-48V8.htm TM . . . 78-73B
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=6005 |