| joe b | -- 09-25-2012 @ 8:02 AM |
|
I need to replace the seals on my windshields and back window on my '41. I remember some time ago there was discussion that one brand/vendor was better that others. Any comments?
|
|
| supereal | -- 09-25-2012 @ 11:46 AM |
|
Regardless of where you order them, most are produced by Dennis Carpenter. His are of very good quality. Just be sure that you order the correct seals, and that they are actually those when they arrive. There are several variations. Some have a trim groove. There are differences in closed cars between coupes, and sedans. Convertibles, and wagons have their own types. There is a full listing in the C&G catalog at cgfordparts.com.
|
|
| joe b | -- 09-26-2012 @ 5:24 AM |
|
Thanks,Super. I will use C&G as I have for the last 16 years.
|
|
| trjford8 | -- 09-26-2012 @ 7:18 AM |
|
C and G has a very knowledgeable counter staff and will make sure you get the correct seals.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=5245 |