Flatbob | -- 06-16-2012 @ 10:31 PM |
Is there a difference in the exterior shape between the '48 & '52 oil truck pan? I ask because am putting 8BA in '36 chassis and am concerned about tie rod/drag link clearance.
|
|
trjford8 | -- 06-17-2012 @ 6:49 AM |
The oil pans in the 48-52 pickup should be the same. Passenger car pans for the 8BA are definitely different than the pickups.
|
|
Flatbob | -- 06-17-2012 @ 8:33 AM |
That's what I thought but wasn't sure when someone told me they used a "2 piece" '48 truck pan; perhaps he was referring to the clean out plate on the bottom of the pan. Thanks for responding. Bob
|
|
51f1 | -- 06-17-2012 @ 1:41 PM |
The '48 - '52 8RTs are all the same with the clean-out. The '53 has no clean-out. Richard
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=4802 |