nsracarnut | -- 03-06-2012 @ 9:37 AM |
Anyone have any sugestions on the best way to install the door glass. I've never done it, didn't know if it's pretty straight forward, or any tricks I should know about. Thanks
|
|
trjford8 | -- 03-06-2012 @ 7:44 PM |
Are you installing the glass in the channel or installing the unit on the regulator in the door?
|
|
Tim I | -- 03-06-2012 @ 9:02 PM |
I went through this a few months ago: https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=3814&keywords= This message was edited by Tim I on 3-6-12 @ 9:02 PM
|
|
nsracarnut | -- 03-07-2012 @ 2:28 PM |
Tim, I found your post from back in Oct very helpful
|
|
nsracarnut | -- 03-07-2012 @ 2:33 PM |
Thanks everyone for the help, I'm putting in new glass and channels along with the cat wiskers on the door and garnish mouldings
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=4415 |