| rustyrelics | -- 12-23-2011 @ 6:39 PM |
|
Hello, I am new to the forum and a new proud owner of an original 1937 club cabriolet project. I am missing the back seat springs and most of the back arm rest,side panels.....also one of the top mechanisim cast hinge points is broken. Has anyone any one out there fabricated the rear seat from a pattern? Reproduced?? Thanks Ken burnflatham@aol.com This message was edited by rustyrelics on 12-24-11 @ 9:25 PM
|
|
| 40 Coupe | -- 12-24-2011 @ 7:33 AM |
|
You may want to check with LeBaron Bonney ask for Doug 978 388-3811 see if the seat is the same for other Club Cabriolets, and what parts they may have. Snyders sells seat springs but they do not list the 37 rear but do list 38, they are 888-262-5712. Check also with Wescotts for the top part, 800-523-6279 or www.wescottsauto.com .
|
|
| rustyrelics | -- 12-24-2011 @ 9:24 PM |
|
Thanks for the tip, I really appreciate it. I did some searching around on line and found a hotrod 37 club cabriolet for sale that had some great pictures of the back seat area, and it appeared to be original seats: http://www.bobgford.com/gillypics/37fordad/1937fordad.htm This at least gives me some idea on the armrest area.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=4140 |