| 41woodie | -- 08-09-2011 @ 4:54 PM |
|
What do I use as a thread sealer that will stand up to gasoline? I want to coat the threads on a small drainplug on the bottom of my gas tank.
|
|
| 51f1 | -- 08-09-2011 @ 6:22 PM |
|
Permatex Aviation Form-a-Gasket No. 3. It's been around all of my life. Richard
|
|
| 40 Coupe | -- 08-10-2011 @ 6:33 AM |
|
The Permatex products seem to be the only ones labeled as fuel resistant.
|
|
| TomO | -- 08-10-2011 @ 7:32 AM |
|
That plug is a pipe thread and should not require sealer. Use a pipe thread lubricant to keep it from seizing. Do not use Teflon tape. Tom
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=3547 |