| Ron Crouch | -- 04-20-2011 @ 1:57 PM |
|
Anybody know where I can get a radiator cap for my 1936 Ford Sedan Flathead v-8. I believe it is an Everstat R-1.----Ron
|
|
| 1942deluxe | -- 04-20-2011 @ 2:40 PM |
|
Ron,go to your previous post to get my contact information if you want the Ford cap.Part number is 48-8100 and says "FILL SLOWLY" on it with the pn stenciled on it and a handle.
|
|
| JimMoulton | -- 04-20-2011 @ 5:32 PM |
|
Ron, As a shot in the dark, try the Ford Barn. On page 2 of the Swap Meet section Chuck Kuntz looks like he is selling off at least one 35/36 a piece at a time. Good luck. Jim
|
|
| 1942deluxe | -- 04-21-2011 @ 1:17 PM |
|
It is on it's way,Ron.Good talking to you!
|
|
| watwasithinking | -- 04-21-2011 @ 6:03 PM |
|
Ron, Here's a photo of the correct cap for your '36. Steel rivet for all of the 1935 models thru April/May 1936 models, and then a switch to brass rivet until end of 1936 production.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=2947 |