proxie35 | -- 02-03-2011 @ 8:24 AM |
Does any know were I can locate a 9278-N Tool For installing or removeing the oil sending unit on the 49-53 flatheads. Thanks Sherrel
|
|
39 Ken | -- 02-03-2011 @ 9:03 AM |
You should post this request on FordBarn; http://www.fordbarn.com/forum/ . Mr Lawson Cox has made a perfect tool for this purpose that can be used from the top of the motor. He may can provide pictures and a drawing . I made one, used it, (it's perfect), I loaned it out and it hasn't come back. I found my pictures but you have disabed your private messages and I can't seem to post pics. Ken This message was edited by 39 Ken on 2-3-11 @ 9:25 AM
|
|
39 Ken | -- 02-03-2011 @ 1:16 PM |
Still trying the picture attachment theory. Please bear with me. This should be the sending unit tool mentioned in the post above. Ken
|
|
39 Ken | -- 02-03-2011 @ 1:18 PM |
That worked. Here's another shot of the tool. Ken
|
|
proxie35 | -- 02-03-2011 @ 3:17 PM |
Thanks Ken, That should be no problem to make. Sherrel
|
|
supereal | -- 02-03-2011 @ 3:42 PM |
I made a special wrench for that purpose many years ago by sawing an old 5/8" wrench and brazing the handle at a right angle to the head. It beats spending big bucks for a job that is seldom required. This message was edited by supereal on 2-4-11 @ 10:52 AM
|
|
JM | -- 02-03-2011 @ 5:08 PM |
Bill Wzorek, the shock re-builder in MA, who frequently posts on both Fordbarn and Chevybarn, also makes a very nice oil pressure sending unit removal tool. I bought one from him a couple years ago for $25.00. Click on attachment below to see picture. JM This message was edited by JM on 2-3-11 @ 5:12 PM
|
|
proxie35 | -- 02-09-2011 @ 9:36 AM |
Thanks to all of you for posting the pictures. I was able to make a tool yesterday. Tool less than an hour to make & it worked great. Sherrel
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=2534 |